[PATCH v3 1/8] ARM: dts: omap: Fixup GPMC child nodes
Krzysztof Kozlowski
krzysztof.kozlowski at canonical.com
Tue Sep 7 05:44:43 PDT 2021
On 07/09/2021 13:32, Roger Quadros wrote:
> Fixes up the GPMC child nodes to prevent dtbs_check errors
> after device tree binding conversion to yaml.
>
> - Use reg address as node name
> - gpmc,cycle2cycle-samecsen and gpmc,cycle2cycle-diffcsen are
> boolean properties.
>
> Signed-off-by: Roger Quadros <rogerq at kernel.org>
> ---
> .../boot/dts/logicpd-som-lv-baseboard.dtsi | 2 +-
> .../boot/dts/logicpd-torpedo-37xx-devkit.dts | 2 +-
> .../boot/dts/logicpd-torpedo-baseboard.dtsi | 2 +-
> arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi | 62 +++++++++----------
> arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 59 +++++++++---------
> arch/arm/boot/dts/omap-zoom-common.dtsi | 16 ++---
> arch/arm/boot/dts/omap2430-sdp.dts | 6 +-
> arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 6 +-
> .../arm/boot/dts/omap3-devkit8000-common.dtsi | 4 +-
> arch/arm/boot/dts/omap3-evm-37xx.dts | 1 +
> arch/arm/boot/dts/omap3-evm-common.dtsi | 9 ---
> .../boot/dts/omap3-evm-processor-common.dtsi | 5 +-
> arch/arm/boot/dts/omap3-evm.dts | 1 +
> arch/arm/boot/dts/omap3-igep0020-common.dtsi | 5 +-
> arch/arm/boot/dts/omap3-ldp.dts | 5 +-
> arch/arm/boot/dts/omap3-n900.dts | 2 +-
> .../dts/omap3-overo-chestnut43-common.dtsi | 6 +-
> .../arm/boot/dts/omap3-overo-tobi-common.dtsi | 6 +-
> .../boot/dts/omap3-overo-tobiduo-common.dtsi | 8 +--
> arch/arm/boot/dts/omap3-sb-t35.dtsi | 4 +-
> arch/arm/boot/dts/omap4-duovero-parlor.dts | 6 +-
> 21 files changed, 105 insertions(+), 112 deletions(-)
>
> diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
> index 7d0468a23781..f2364cb114c5 100644
> --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
> +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
> @@ -65,7 +65,7 @@
> 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */
> 2 0 0x10000000 0x2000000>; /* CS2: 32MB for NOR */
>
> - ethernet at gpmc {
> + gpmc_ethernet: ethernet at 1,0 {
> pinctrl-names = "default";
> pinctrl-0 = <&lan9221_pins>;
> interrupt-parent = <&gpio5>;
> diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
> index 5532db04046c..6357915d207b 100644
> --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
> +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
> @@ -4,8 +4,8 @@
>
> #include "omap36xx.dtsi"
> #include "logicpd-torpedo-som.dtsi"
> -#include "omap-gpmc-smsc9221.dtsi"
> #include "logicpd-torpedo-baseboard.dtsi"
> +#include "omap-gpmc-smsc9221.dtsi"
>
> / {
> model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
> diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
> index 533a47bc4a53..05049a34b6f1 100644
> --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
> +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
> @@ -95,7 +95,7 @@
> ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
> 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
>
> - ethernet at gpmc {
> + gpmc_ethernet: ethernet at 1,0 {
> pinctrl-names = "default";
> pinctrl-0 = <&lan9221_pins>;
> interrupt-parent = <&gpio5>;
> diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
> index ded7e8fec9eb..2a462cb65a7d 100644
> --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
> +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
> @@ -20,36 +20,34 @@
> };
> };
>
> -&gpmc {
> - ethernet at gpmc {
> - compatible = "smsc,lan9221", "smsc,lan9115";
> - bank-width = <2>;
> - gpmc,device-width = <1>;
> - gpmc,cycle2cycle-samecsen = <1>;
> - gpmc,cycle2cycle-diffcsen = <1>;
> - gpmc,cs-on-ns = <5>;
> - gpmc,cs-rd-off-ns = <150>;
> - gpmc,cs-wr-off-ns = <150>;
> - gpmc,adv-on-ns = <0>;
> - gpmc,adv-rd-off-ns = <15>;
> - gpmc,adv-wr-off-ns = <40>;
> - gpmc,oe-on-ns = <45>;
> - gpmc,oe-off-ns = <140>;
> - gpmc,we-on-ns = <45>;
> - gpmc,we-off-ns = <140>;
> - gpmc,rd-cycle-ns = <155>;
> - gpmc,wr-cycle-ns = <155>;
> - gpmc,access-ns = <120>;
> - gpmc,page-burst-access-ns = <20>;
> - gpmc,bus-turnaround-ns = <75>;
> - gpmc,cycle2cycle-delay-ns = <75>;
> - gpmc,wait-monitoring-ns = <0>;
> - gpmc,clk-activation-ns = <0>;
> - gpmc,wr-data-mux-bus-ns = <0>;
> - gpmc,wr-access-ns = <0>;
> - vddvario-supply = <&vddvario>;
> - vdd33a-supply = <&vdd33a>;
> - reg-io-width = <4>;
> - smsc,save-mac-address;
> - };
> +&gpmc_ethernet {
> + compatible = "smsc,lan9221", "smsc,lan9115";
This looks like regular override-by-label instead of full path.
Unfortunately change of the indentation causes difficulties to find the
real difference - if there is such. Can you split it into separate patch?
The point is that override-by-label should have zero effect on
functionality and produce same dtb. This is easy to compare with
dtx_diff or fdt-decompile but if you mix it with other changes, the
comparison is not straight-forward.
> + bank-width = <2>;
> + gpmc,device-width = <1>;
> + gpmc,cycle2cycle-samecsen;
> + gpmc,cycle2cycle-diffcsen;
> + gpmc,cs-on-ns = <5>;
> + gpmc,cs-rd-off-ns = <150>;
> + gpmc,cs-wr-off-ns = <150>;
> + gpmc,adv-on-ns = <0>;
> + gpmc,adv-rd-off-ns = <15>;
> + gpmc,adv-wr-off-ns = <40>;
> + gpmc,oe-on-ns = <45>;
> + gpmc,oe-off-ns = <140>;
> + gpmc,we-on-ns = <45>;
> + gpmc,we-off-ns = <140>;
> + gpmc,rd-cycle-ns = <155>;
> + gpmc,wr-cycle-ns = <155>;
> + gpmc,access-ns = <120>;
> + gpmc,page-burst-access-ns = <20>;
> + gpmc,bus-turnaround-ns = <75>;
> + gpmc,cycle2cycle-delay-ns = <75>;
> + gpmc,wait-monitoring-ns = <0>;
> + gpmc,clk-activation-ns = <0>;
> + gpmc,wr-data-mux-bus-ns = <0>;
> + gpmc,wr-access-ns = <0>;
> + vddvario-supply = <&vddvario>;
> + vdd33a-supply = <&vdd33a>;
> + reg-io-width = <4>;
> + smsc,save-mac-address;
> };
> diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
> index 7f6aefd13451..c1e78f929d2b 100644
> --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
> +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
> @@ -24,36 +24,33 @@
> };
> };
>
> -&gpmc {
> - ethernet at gpmc {
> - compatible = "smsc,lan9221","smsc,lan9115";
> - bank-width = <2>;
> +&gpmc_ethernet {
> + compatible = "smsc,lan9221","smsc,lan9115";
> + bank-width = <2>;
> + gpmc,mux-add-data = <0>;
> + gpmc,cs-on-ns = <0>;
> + gpmc,cs-rd-off-ns = <42>;
> + gpmc,cs-wr-off-ns = <36>;
> + gpmc,adv-on-ns = <6>;
> + gpmc,adv-rd-off-ns = <12>;
> + gpmc,adv-wr-off-ns = <12>;
> + gpmc,oe-on-ns = <0>;
> + gpmc,oe-off-ns = <42>;
> + gpmc,we-on-ns = <0>;
> + gpmc,we-off-ns = <36>;
> + gpmc,rd-cycle-ns = <60>;
> + gpmc,wr-cycle-ns = <54>;
> + gpmc,access-ns = <36>;
> + gpmc,page-burst-access-ns = <0>;
> + gpmc,bus-turnaround-ns = <0>;
> + gpmc,cycle2cycle-delay-ns = <0>;
> + gpmc,wr-data-mux-bus-ns = <18>;
> + gpmc,wr-access-ns = <42>;
> + gpmc,cycle2cycle-samecsen;
> + gpmc,cycle2cycle-diffcsen;
>
> - gpmc,mux-add-data;
Same here and in other places. Actually here a sneaky change is visible
- different property.
Best regards,
Krzysztof
More information about the linux-mtd
mailing list