[RFC PATCH 2/6] mtd: spi-nor: core: consolidate read op creation

Michael Walle michael at walle.cc
Tue Mar 23 23:17:36 GMT 2021


Am 2021-03-11 20:12, schrieb Pratyush Yadav:
> Currently the spi_mem_op to read from the flash is used in two places:
> spi_nor_create_read_dirmap() and spi_nor_spimem_read_data(). In a later
> commit this number will increase to three. Instead of repeating the 
> same
> code thrice, add a function that returns a template of the read op. The
> callers can then fill in the details like address, data length, data
> buffer location.
> 
> Signed-off-by: Pratyush Yadav <p.yadav at ti.com>
> ---
>  drivers/mtd/spi-nor/core.c | 62 ++++++++++++++++++++------------------
>  1 file changed, 32 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 4a315cb1c4db..88888df009f0 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -183,6 +183,33 @@ static int spi_nor_controller_ops_erase(struct
> spi_nor *nor, loff_t offs)
>  	return nor->controller_ops->erase(nor, offs);
>  }
> 
> +/**
> + * spi_nor_spimem_get_read_op() - return a template for the spi_mem_op 
> used for
> + *                                reading data from the flash via 
> spi-mem.
> + * @nor:        pointer to 'struct spi_nor'
> + *
> + * Return: A template of the 'struct spi_mem_op' for used for reading 
> data from
> + * the flash. The caller is expected to fill in the address, data 
> length, and
> + * the data buffer.
> + */
> +static struct spi_mem_op spi_nor_spimem_get_read_op(struct spi_nor 
> *nor)
> +{
> +	struct spi_mem_op op =
> +		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
> +			   SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
> +			   SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
> +			   SPI_MEM_OP_DATA_IN(1, NULL, 0));
> +
> +	spi_nor_spimem_setup_op(nor, &op, nor->read_proto);
> +
> +	/* convert the dummy cycles to the number of bytes */
> +	op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
> +	if (spi_nor_protocol_is_dtr(nor->read_proto))
> +		op.dummy.nbytes *= 2;
> +
> +	return op;
> +}
> +
>  /**
>   * spi_nor_spimem_read_data() - read data from flash's memory region 
> via
>   *                              spi-mem
> @@ -196,21 +223,14 @@ static int spi_nor_controller_ops_erase(struct
> spi_nor *nor, loff_t offs)
>  static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t 
> from,
>  					size_t len, u8 *buf)
>  {
> -	struct spi_mem_op op =
> -		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
> -			   SPI_MEM_OP_ADDR(nor->addr_width, from, 0),
> -			   SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
> -			   SPI_MEM_OP_DATA_IN(len, buf, 0));
> +	struct spi_mem_op op = spi_nor_spimem_get_read_op(nor);
>  	bool usebouncebuf;
>  	ssize_t nbytes;
>  	int error;
> 
> -	spi_nor_spimem_setup_op(nor, &op, nor->read_proto);
> -
> -	/* convert the dummy cycles to the number of bytes */
> -	op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
> -	if (spi_nor_protocol_is_dtr(nor->read_proto))
> -		op.dummy.nbytes *= 2;
> +	op.addr.val = from;
> +	op.data.nbytes = len;
> +	op.data.buf.in = buf;
> 
>  	usebouncebuf = spi_nor_spimem_bounce(nor, &op);
> 
> @@ -3581,28 +3601,10 @@ EXPORT_SYMBOL_GPL(spi_nor_scan);
>  static int spi_nor_create_read_dirmap(struct spi_nor *nor)
>  {
>  	struct spi_mem_dirmap_info info = {
> -		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
> -				      SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
> -				      SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
> -				      SPI_MEM_OP_DATA_IN(0, NULL, 0)),
> +		.op_tmpl = spi_nor_spimem_get_read_op(nor),
>  		.offset = 0,
>  		.length = nor->mtd.size,
>  	};
> -	struct spi_mem_op *op = &info.op_tmpl;
> -
> -	spi_nor_spimem_setup_op(nor, op, nor->read_proto);
> -
> -	/* convert the dummy cycles to the number of bytes */
> -	op->dummy.nbytes = (nor->read_dummy * op->dummy.buswidth) / 8;
> -	if (spi_nor_protocol_is_dtr(nor->read_proto))
> -		op->dummy.nbytes *= 2;
> -
> -	/*
> -	 * Since spi_nor_spimem_setup_op() only sets buswidth when the number
> -	 * of data bytes is non-zero, the data buswidth won't be set here. 
> So,
> -	 * do it explicitly.
> -	 */
> -	op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);

I guess this isn't needed anymore because spi_nor_spimem_get_read_op() 
uses a
data length of 1, right?

> 
>  	nor->dirmap.rdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem,
>  						       &info);

-michael



More information about the linux-mtd mailing list