[PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property

[Rob Herring]

On Thu, Jun 10, 2021 at 10:20:30AM +0200, Miquel Raynal wrote:
> The SMC bus controller features several register sets. The one pointed
> by the reg property is for the SMC configuration (impacts the
> sub-controllers configuration), while the others are meant to be used to
> send regular cycles on the memory bus (eg. CMD, ADDR, DATA for a NAND
> device). Detail this a little bit for the sake of clarity.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  .../devicetree/bindings/memory-controllers/pl353-smc.txt       | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> index ecd46856f139..ba6a5426f62b 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> @@ -5,7 +5,8 @@ of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
>  
>  Required properties:
>  - compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
> -- reg			: Controller registers map and length.
> +- reg			: SMC controller and sub-controllers configuration
> +			  registers.

I think you could just drop this patch. Otherwise, this doesn't match 
what's now in the yaml file.

Rob