[PATCH v4 0/7] mtd: spi-nor: add xSPI Octal DTR support

[masonccyang at mxic.com.tw]

+ YC Lin in loop,

YC(ycllin at mxic.com.tw)will take over this patch set.


> Subject
> 
> [PATCH v4 0/7] mtd: spi-nor: add xSPI Octal DTR support
> 
> Hello,
> 
> JESD216C has defined specification for Octal 8S-8S-8S and 8D-8D-8D.
> Based on JEDEC216C Basic Flash Parameter Table (BFPT) driver extract
> DWORD-18: command and command extension type.
> DWORD-20: Maximum operation speed of device in Octal mode.
> 
> xSPI profile 1.0 table:
> DWORD-1: Read Fast command, the number of dummy cycles and address 
nbytes
>     for Read Status Register command.
> DWORD-2: Read/Write volatile Register command for CFG Reg2.
> DWORD-4 and DWORD-5: dummy cycles used for various frequencies based on
> maximum speed of device from BFPT 20th DWORD.
> 
> Ccommand sequences to change to octal DTR mode:
> The length of each command sequence is 8 per byte for single SPI mode 
and
> patching driver to parse and execute these sequences for octal DTR mode.
> 
> By Vignesh's comments, this patches set is dependency on Pratyush's
> [1][2][5][7][8] and [10][12].
> 
> Tested on Macronix's Zynq PicoZed board with Macronix's SPI controller
> (spi-mxic.c) driver patched on mx25uw51245g Octal flash.
> 


CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================