[PATCH v5 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
Geert Uytterhoeven
geert at linux-m68k.org
Tue Jul 7 05:33:07 EDT 2020
Hi Sergei,
On Tue, Jun 16, 2020 at 10:01 PM Sergei Shtylyov
<sergei.shtylyov at cogentembedded.com> wrote:
> Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
> HyperFlash connected to the SoC to be accessed via the external address
> space read mode or the manual mode.
>
> Document the device tree bindings for the Renesas RPC-IF found in the R-Car
> gen3 SoCs.
>
> Based on the original patch by Mason Yang <masonccyang at mxic.com.tw>.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
Thanks for your patch!
> --- /dev/null
> +++ linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas Reduced Pin Count Interface (RPC-IF)
> +
> +maintainers:
> + - Sergei Shtylyov <sergei.shtylyov at gmail.com>
> +
> +description: |
> + Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
> + be accessed via the external address space read mode or the manual mode.
> +
> + The flash chip itself should be represented by a subnode of the RPC-IF node.
> + The flash interface is selected based on the "compatible" property of this
> + subnode:
> + - if it contains "jedec,spi-nor", then SPI is used;
> + - if it contains "cfi-flash", then HyperFlash is used.
> +patternProperties:
> + "flash@[0-9a-f]+$":
> + type: object
> + properties:
> + compatible:
> + enum:
> + - cfi-flash
> + - jedec,spi-nor
The above does not allow specifying e.g.
compatible = "spansion,s25fs512s", "jedec,spi-nor";
arch/arm64/boot/dts/renesas/r8a77970-eagle.dt.yaml: spi at ee200000:
flash at 0:compatible: Additional items are not allowed ('jedec,spi-nor'
was unexpected)
arch/arm64/boot/dts/renesas/r8a77970-eagle.dt.yaml: spi at ee200000:
flash at 0:compatible:0: 'spansion,s25fs512s' is not one of ['cfi-flash',
'jedec,spi-nor']
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/renesas-cpg-mssr.h>
> + #include <dt-bindings/power/r8a77995-sysc.h>
> +
> + spi at ee200000 {
> + compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
> + reg = <0xee200000 0x200>,
> + <0x08000000 0x4000000>,
> + <0xee208000 0x100>;
> + reg-names = "regs", "dirmap", "wbuf";
> + clocks = <&cpg CPG_MOD 917>;
> + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> + resets = <&cpg 917>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + flash at 0 {
> + compatible = "jedec,spi-nor";
... which you nicely circumvented in the example ;-)
> + reg = <0>;
> + spi-max-frequency = <40000000>;
> + spi-tx-bus-width = <1>;
> + spi-rx-bus-width = <1>;
> + };
> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
More information about the linux-mtd
mailing list