[PATCH] mtd: spi-nor: spansion: Remove s70fl01gs from flash_info

[Tudor.Ambarus at microchip.com]

On 6/26/20 8:16 AM, kuwano.takahiro at gmail.com wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> From: Takahiro Kuwano <Takahiro.Kuwano at cypress.com>
> 
> The s70fl01gs is a dual die stack of two s25fl512s die with dedicated chip
> select pins to each. Tested with the device and confirmed that is working
> as two s25fl512s devices. The current device ID in the flash_info table

Right, the datasheet specifies too that the S70FS01GS device is a dual die
stack of two FS512S die.

> matches with s70fs01gs which does not work with current MTD.

s70fs01gs is not correctly supported indeed, but the lower half of it
(first s25fl512s die) should work. Can't you correctly read/erase/write
on the lower half of the s70fs01gs flash with the current code?

Cheers,
ta