WD MyCloud Ex, Armada-370, pxa3xx-nand, marvell-nfc

[David Schaefer]

If this is a regression, how can we continue here? Can I give hardware
specs and logs? I have soldered on the board to access UART. I can
provide e.g. boot logs.

/David

Am Mo., 14. Dez. 2020 um 16:20 Uhr schrieb Richard Weinberger <richard at nod.at>:
>
> David,
>
> ----- Ursprüngliche Mail -----
> > I have checked the kernel configuration. For 4.15.18 I have these settings:
> > CONFIG_MTD_NAND_ECC=y
> > CONFIG_MTD_NAND=y
> > CONFIG_MTD_NAND_PXA3xx=y
> >
> > and for 4.16.1
> >
> > CONFIG_MTD_NAND_ECC=y
> > CONFIG_MTD_NAND=y
> > CONFIG_MTD_NAND_MARVELL=y
> >
> > I actually copied the working configuration from 4.15.18 to 4.16.1,
> > did make oldconfig, and compiled it the same way as 4.15.18. Like I
> > said above, 4.15 works, 4.16 does not.
> > I hope this answers your question whether I see the issue with the new
> > and the old marvell drivers because I am not 100% sure what you refer
> > to here (I guess you mean PXA3XX vs NAND).
>
> Ah, right. I forgot that the old driver got removed. I thought we kept it for a few releases. ;-\
> So there is a regression.
>
> Thanks,
> //richard