[PATCH 3/3] mtd: nand: mxc: Drop now unnecessary correct_data function

[Sascha Hauer]

correct_data is no longer used for v2_v3 controllers, so remove
it.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/mtd/nand/mxc_nand.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index a54804f14bb1..41838ee79bb5 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -618,12 +618,6 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
 	return 0;
 }
 
-static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
-				 u_char *read_ecc, u_char *calc_ecc)
-{
-	return 0;
-}
-
 static int mxc_nand_read_page_hwecc_v2_v3(struct mtd_info *mtd,
 					  struct nand_chip *chip,
 					  uint8_t *buf, int oob_required,
@@ -1480,7 +1474,6 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
 	.get_ecc_status = get_ecc_status_v2,
 	.ooblayout = &mxc_v2_ooblayout_ops,
 	.select_chip = mxc_nand_select_chip_v2,
-	.correct_data = mxc_nand_correct_data_v2_v3,
 	.setup_data_interface = mxc_nand_v2_setup_data_interface,
 	.irqpending_quirk = 0,
 	.needs_ip = 0,
@@ -1507,7 +1500,6 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
 	.get_ecc_status = get_ecc_status_v3,
 	.ooblayout = &mxc_v2_ooblayout_ops,
 	.select_chip = mxc_nand_select_chip_v1_v3,
-	.correct_data = mxc_nand_correct_data_v2_v3,
 	.irqpending_quirk = 0,
 	.needs_ip = 1,
 	.regs_offset = 0,
@@ -1534,7 +1526,6 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
 	.get_ecc_status = get_ecc_status_v3,
 	.ooblayout = &mxc_v2_ooblayout_ops,
 	.select_chip = mxc_nand_select_chip_v1_v3,
-	.correct_data = mxc_nand_correct_data_v2_v3,
 	.irqpending_quirk = 0,
 	.needs_ip = 1,
 	.regs_offset = 0,
-- 
2.11.0