[PATCHv3 2/2] mtd: m25p80: restore the status of SPI flash when exiting

[Cyrille Pitchen]

Le 06/12/2017 à 03:53, Zhiqiang Hou a écrit :
> From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> 
> Restore the status to be compatible with legacy devices.
> Take Freescale eSPI boot for example, it copies (in 3 Byte
> addressing mode) the RCW and bootloader images from SPI flash
> without firing a reset signal previously, so the reboot command
> will fail without reseting the addressing mode of SPI flash.
resetting

> This patch implement .shutdown function to restore the status
implements
> in reboot process, and add the same operation to the .remove
> function.
> 
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

Applied to the spi-nor/next branch of l2-mtd

Thanks!

(corrected few mistakes in the commit message)
> ---
> V3:
>  - Modified the commit to make this patch specific.
> 
>  drivers/mtd/devices/m25p80.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index dbe6a1de2bb8..a4e18f6aaa33 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -307,10 +307,18 @@ static int m25p_remove(struct spi_device *spi)
>  {
>  	struct m25p	*flash = spi_get_drvdata(spi);
>  
> +	spi_nor_restore(&flash->spi_nor);
> +
>  	/* Clean up MTD stuff. */
>  	return mtd_device_unregister(&flash->spi_nor.mtd);
>  }
>  
> +static void m25p_shutdown(struct spi_device *spi)
> +{
> +	struct m25p *flash = spi_get_drvdata(spi);
> +
> +	spi_nor_restore(&flash->spi_nor);
> +}
>  /*
>   * Do NOT add to this array without reading the following:
>   *
> @@ -386,6 +394,7 @@ static struct spi_driver m25p80_driver = {
>  	.id_table	= m25p_ids,
>  	.probe	= m25p_probe,
>  	.remove	= m25p_remove,
> +	.shutdown	= m25p_shutdown,
>  
>  	/* REVISIT: many of these chips have deep power-down modes, which
>  	 * should clearly be entered on suspend() to minimize power use.
>