[PATCH 1/2] dt-bindings: mtd: Altera ASMI Parallel II IP Core

[Rob Herring]

On Sun, Aug 06, 2017 at 11:24:02AM -0700, matthew.gerlach at linux.intel.com wrote:
> From: Matthew Gerlach <matthew.gerlach at linux.intel.com>
> 
> Device Tree bindinds for Altera ASMI Parallel II IP Core.

s/bindinds/bindings/

> 
> Signed-off-by: Matthew Gerlach <matthew.gerlach at linux.intel.com>
> ---
>  .../devicetree/bindings/mtd/altera-asmip2.txt      | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/altera-asmip2.txt b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> new file mode 100644
> index 0000000..3380366
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> @@ -0,0 +1,22 @@
> +* Altera ASMI Parallel II IP Core
> +
> +Required properties:
> +- compatible : Should be "altr,asmi_parallel2".

s/_/-/

> +- reg : A tuple consisting of a physical address and length.
> +
> +Optional subnodes:
> +Subnodes of the Altera ASMI Paralllel II IP Core are spi slave nodes.

But this is not a general purpose SPI controller?

> +- reg : chip select value
> +- label : optional user friendly label
> +
> +Example:
> +
> +qspi: spi at a0001000 {
> +	compatible = "altr,asmi_parallel2";
> +	reg = <0xa0001000 0x10>;
> +
> +	flash at 0 {

This should have a compatible.

> +		reg = <0>;
> +		label = "FPGA Image";
> +	};
> +};
> -- 
> 2.7.4
>