[PATCH v2 1/2] mtd: nand: vf610: Check the return value from clk_prepare_enable()

[Boris Brezillon]

On Mon, 17 Jul 2017 21:54:07 -0300
Fabio Estevam <festevam at gmail.com> wrote:

> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> clk_prepare_enable() may fail, so we should better check its return value
> and propagate it in the case of error.
> 

Applied both.

Thanks,

Boris

> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---
> Changes since v1:
> - None
> 
>  drivers/mtd/nand/vf610_nfc.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
> index 744ab10..9e49672 100644
> --- a/drivers/mtd/nand/vf610_nfc.c
> +++ b/drivers/mtd/nand/vf610_nfc.c
> @@ -814,12 +814,16 @@ static int vf610_nfc_suspend(struct device *dev)
>  
>  static int vf610_nfc_resume(struct device *dev)
>  {
> +	int err;
> +
>  	struct mtd_info *mtd = dev_get_drvdata(dev);
>  	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
>  
>  	pinctrl_pm_select_default_state(dev);
>  
> -	clk_prepare_enable(nfc->clk);
> +	err = clk_prepare_enable(nfc->clk);
> +	if (err)
> +		return err;
>  
>  	vf610_nfc_preinit_controller(nfc);
>  	vf610_nfc_init_controller(nfc);