[PATCH 09/11] mtd: nand: denali: return error code from nand_scan_ident/tail on error

[Marek Vasut]

On 11/09/2016 05:35 AM, Masahiro Yamada wrote:
> The nand_scan_ident/tail() returns an appropriate error value when
> it fails.  Use it instead of the fixed -ENXIO.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>

Reviewed-by: Marek Vasut <marek.vasut at gmail.com>

> ---
> 
>  drivers/mtd/nand/denali.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
> index f188a48..d482d8d 100644
> --- a/drivers/mtd/nand/denali.c
> +++ b/drivers/mtd/nand/denali.c
> @@ -1474,10 +1474,9 @@ int denali_init(struct denali_nand_info *denali)
>  	 * this is the first stage in a two step process to register
>  	 * with the nand subsystem
>  	 */
> -	if (nand_scan_ident(mtd, denali->max_banks, NULL)) {
> -		ret = -ENXIO;
> +	ret = nand_scan_ident(mtd, denali->max_banks, NULL);
> +	if (ret)
>  		goto failed_req_irq;
> -	}
>  
>  	/* allocate the right size buffer now */
>  	devm_kfree(denali->dev, denali->buf.buf);
> @@ -1580,10 +1579,9 @@ int denali_init(struct denali_nand_info *denali)
>  	denali->nand.ecc.write_oob = denali_write_oob;
>  	denali->nand.erase = denali_erase;
>  
> -	if (nand_scan_tail(mtd)) {
> -		ret = -ENXIO;
> +	ret = nand_scan_tail(mtd);
> +	if (ret)
>  		goto failed_req_irq;
> -	}
>  
>  	ret = mtd_device_register(mtd, NULL, 0);
>  	if (ret) {
> 


-- 
Best regards,
Marek Vasut