[PATCH 5/7] mtd: nand: Add Hynix H27UBG8T2BTR-BC to nand_ids table

Aleksei Mamlin mamlinav at gmail.com
Mon Jun 6 03:24:22 PDT 2016


Add the full description of the Hynix H27UBG8T2BTR-BC NAND chip in the
nand_ids table so that we can later use the NAND ECC infos and ONFI timings
mode in controller drivers.

Signed-off-by: Aleksei Mamlin <mamlinav at gmail.com>
---
 drivers/mtd/nand/nand_ids.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index ccc05f5..ccdc773 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -52,6 +52,10 @@ struct nand_flash_dev nand_flash_ids[] = {
 		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
 		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
 		  NAND_ECC_INFO(40, SZ_1K), 4 },
+	{"H27UBG8T2BTR-BC 32G 3.3V 8-bit",
+		{ .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} },
+		  SZ_8K, SZ_4K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
+		  NAND_ECC_INFO(40, SZ_1K), 0 },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
-- 
2.7.3




More information about the linux-mtd mailing list