[PATCH v7 3/7] dmaengine: mxs: add i.MX7D APBH DMA support

[Andy Shevchenko]

On Thu, Oct 29, 2015 at 11:03 PM, Han Xu <han.xu at freescale.com> wrote:
> On Thu, Oct 29, 2015 at 11:08:10PM +0200, Andy Shevchenko wrote:
>> On Wed, Oct 28, 2015 at 12:05 AM, Han Xu <b45815 at freescale.com> wrote:
>> > From: Adrian Alonso <aalonso at freescale.com>
>> >
>> > supports APBH DMA on i.MX7D by add extra clock clk_io
>>
>> []
>>
>> >  MODULE_DEVICE_TABLE(of, mxs_dma_dt_ids);
>> > @@ -440,6 +448,13 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan)
>> >         if (ret)
>> >                 goto err_clk;
>> >
>> > +       /* enable the extra clk_io clock for i.MX7D */
>> > +       if (mxs_dma->dev_id == IMX7D_DMA) {
>> > +               ret = clk_prepare_enable(mxs_dma->clk_io);
>> > +               if (ret)
>> > +                       goto err_clk_unprepare;
>>
>> Perhaps err_clk.
>>
> it is err_clk_unprepare

Ah, you are right.

>> > +       }
>> > +
>> >         mxs_dma_reset_chan(chan);
>> >
>> >         dma_async_tx_descriptor_init(&mxs_chan->desc, chan);
>> > @@ -450,6 +465,8 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan)
>> >
>> >         return 0;
>> >
>> > +err_clk_unprepare:
>> > +       clk_disable_unprepare(mxs_dma->clk);
>> >  err_clk:
>> >         free_irq(mxs_chan->chan_irq, mxs_dma);


-- 
With Best Regards,
Andy Shevchenko