[PATCH] mtd: atmel_nand: check NFC busy flag by HSMC_SR instead of NFC cmd regs

Brian Norris computersforpeace at gmail.com
Tue Jan 20 12:31:44 PST 2015


On Thu, Jan 15, 2015 at 06:45:53PM +0800, Josh Wu wrote:

Was this written by Boris? If so, then it needs a 'From:' line at the
start of the body. (Make sure 'Author' is correct in git, then
git-format-patch/git-send-email will get it right for you.)

> Currently the driver read NFC command registers to get NFC busy flag.
> Actually this flag also can be get by reading HSMC_SR register.
> 
> Use the read NFC command registers need mapping a huge memory region.
> To save the mapped memory region, we change to check NFC busy flag by
> reading HSMC_SR register.

Are we actually saving anything yet? You didn't change the requested
region yet.

> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> Acked-by: Josh Wu <josh.wu at atmel.com>

Since this is passing through your hands, Josh, it should be
'Signed-off-by' not 'Acked-by'.

> ---
> 
>  drivers/mtd/nand/atmel_nand.c     | 3 +--
>  drivers/mtd/nand/atmel_nand_nfc.h | 1 +
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index 3853597..125330b 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -1699,8 +1699,7 @@ static int nfc_send_command(struct atmel_nand_host *host,
>  		cmd, addr, cycle0);
>  
>  	timeout = jiffies + msecs_to_jiffies(NFC_TIME_OUT_MS);
> -	while (nfc_cmd_readl(NFCADDR_CMD_NFCBUSY, host->nfc->base_cmd_regs)
> -			& NFCADDR_CMD_NFCBUSY) {
> +	while (nfc_readl(host->nfc->hsmc_regs, SR) & NFC_SR_BUSY) {
>  		if (time_after(jiffies, timeout)) {
>  			dev_err(host->dev,
>  				"Time out to wait CMD_NFCBUSY ready!\n");

Change the timeout text?

> diff --git a/drivers/mtd/nand/atmel_nand_nfc.h b/drivers/mtd/nand/atmel_nand_nfc.h
> index 85b8ca6..4d5d262 100644
> --- a/drivers/mtd/nand/atmel_nand_nfc.h
> +++ b/drivers/mtd/nand/atmel_nand_nfc.h
> @@ -35,6 +35,7 @@
>  #define		NFC_CTRL_DISABLE	(1 << 1)
>  
>  #define ATMEL_HSMC_NFC_SR	0x08		/* NFC Status Register */
> +#define		NFC_SR_BUSY		(1 << 8)
>  #define		NFC_SR_XFR_DONE		(1 << 16)
>  #define		NFC_SR_CMD_DONE		(1 << 17)
>  #define		NFC_SR_DTOE		(1 << 20)

Brian



More information about the linux-mtd mailing list