[PATCH v4 0/3] mtd: nand: jz4780: Add NAND and BCH drivers

[Alex Smith]

On 27/07/2015 14:50, Alex Smith wrote:
> Hi,
> 
> This series adds support for the BCH controller and NAND devices on
> the Ingenic JZ4780 SoC.
> 
> Tested on the MIPS Creator Ci20 board. All dependencies are now in
> mainline so it should be possible to compile test now.
> 
> This version of the series has been rebased on 4.2-rc4, and also adds
> an additional patch to fix an issue that was encountered in the
> external Ci20 3.18 kernel branch.
> 
> Review and feedback welcome.
> 
> Thanks,
> Alex
> 
> Alex Smith (3):
>   mtd: nand: increase ready wait timeout and report timeouts
>   dt-bindings: binding for jz4780-{nand,bch}
>   mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
> 
>  .../bindings/mtd/ingenic,jz4780-nand.txt           |  57 ++++
>  drivers/mtd/nand/Kconfig                           |   7 +
>  drivers/mtd/nand/Makefile                          |   1 +
>  drivers/mtd/nand/jz4780_bch.c                      | 354 +++++++++++++++++++
>  drivers/mtd/nand/jz4780_bch.h                      |  42 +++
>  drivers/mtd/nand/jz4780_nand.c                     | 376 +++++++++++++++++++++
>  drivers/mtd/nand/nand_base.c                       |  15 +-
>  7 files changed, 849 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
>  create mode 100644 drivers/mtd/nand/jz4780_bch.c
>  create mode 100644 drivers/mtd/nand/jz4780_bch.h
>  create mode 100644 drivers/mtd/nand/jz4780_nand.c

Hi,

Would it be possible for these to go in for 4.3?

Thanks,
Alex