[PATCH v2 4/6] mtd: nand: gpmi: add GPMI NAND support for i.MX7D
Huang Shijie
shijie.huang at arm.com
Mon Aug 17 23:52:52 PDT 2015
On Mon, Aug 17, 2015 at 10:24:55PM -0500, Han Xu wrote:
> support GPMI NAND on i.MX7D
>
> Signed-off-by: Han Xu <b45815 at freescale.com>
> ---
> drivers/mtd/nand/gpmi-nand/bch-regs.h | 14 +++++++-------
> drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 10 ++++++----
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 24 ++++++++++++++++++++----
> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 7 +++++--
> 4 files changed, 38 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> index 05bb91f..53e58bc 100644
> --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
> +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> @@ -1,7 +1,7 @@
> /*
> * Freescale GPMI NAND Flash Driver
> *
> - * Copyright 2008-2011 Freescale Semiconductor, Inc.
> + * Copyright 2008-2015 Freescale Semiconductor, Inc.
> * Copyright 2008 Embedded Alley Solutions, Inc.
> *
> * This program is free software; you can redistribute it and/or modify
> @@ -54,7 +54,7 @@
> #define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0 11
> #define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0 (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
> #define BF_BCH_FLASH0LAYOUT0_ECC0(v, x) \
> - (GPMI_IS_MX6(x) \
> + ((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) \
I suggest we can introduce a new macro to wrap it:
#define GPMI_IS_MX(x) (GPMI_IS_MX6(x) || GPMI_IS_MX7(x)
So when the imx8 or imx9 appear, we only change the GPMI_IS_MX(), and we do not need to
change so many places as show below.
thanks
Huang Shijie
> ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) \
> & MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0) \
> : (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) \
> @@ -65,7 +65,7 @@
> #define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \
> (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
> #define BF_BCH_FLASH0LAYOUT0_GF(v, x) \
> - ((GPMI_IS_MX6(x) && ((v) == 14)) \
> + (((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14))\
> ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \
> & MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \
> : 0 \
> @@ -77,7 +77,7 @@
> #define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
> (0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
> #define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x) \
> - (GPMI_IS_MX6(x) \
> + ((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) \
> ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
> : ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
> )
> @@ -96,7 +96,7 @@
> #define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN 11
> #define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
> #define BF_BCH_FLASH0LAYOUT1_ECCN(v, x) \
> - (GPMI_IS_MX6(x) \
> + ((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) \
> ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) \
> & MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN) \
> : (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) \
> @@ -107,7 +107,7 @@
> #define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \
> (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
> #define BF_BCH_FLASH0LAYOUT1_GF(v, x) \
> - ((GPMI_IS_MX6(x) && ((v) == 14)) \
> + (((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14))\
> ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \
> & MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \
> : 0 \
> @@ -119,7 +119,7 @@
> #define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
> (0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
> #define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x) \
> - (GPMI_IS_MX6(x) \
> + ((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) \
> ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
> : ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
> )
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> index 43fa16b..6b37414 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -1,7 +1,7 @@
> /*
> * Freescale GPMI NAND Flash Driver
> *
> - * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
> + * Copyright (C) 2008-2015 Freescale Semiconductor, Inc.
> * Copyright (C) 2008 Embedded Alley Solutions, Inc.
> *
> * This program is free software; you can redistribute it and/or modify
> @@ -971,7 +971,8 @@ int gpmi_extra_init(struct gpmi_nand_data *this)
> struct nand_chip *chip = &this->nand;
>
> /* Enable the asynchronous EDO feature. */
> - if (GPMI_IS_MX6(this) && chip->onfi_version) {
> + if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
> + && chip->onfi_version) {
> int mode = onfi_get_async_timing_mode(chip);
>
> /* We only support the timing mode 4 and mode 5. */
> @@ -1093,12 +1094,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
> if (GPMI_IS_MX23(this)) {
> mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
> reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
> - } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
> + } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this) ||
> + GPMI_IS_MX7(this)) {
> /*
> * In the imx6, all the ready/busy pins are bound
> * together. So we only need to check chip 0.
> */
> - if (GPMI_IS_MX6(this))
> + if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
> chip = 0;
>
> /* MX28 shares the same R/B register as MX6Q. */
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 01d24dd..0462103 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -77,6 +77,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6sx = {
> .max_chain_delay = 12,
> };
>
> +static const struct gpmi_devdata gpmi_devdata_imx7d = {
> + .type = IS_MX7D,
> + .bch_max_ecc_strength = 62,
> + .max_chain_delay = 12,
> +};
> +
> static irqreturn_t bch_irq(int irq, void *cookie)
> {
> struct gpmi_nand_data *this = cookie;
> @@ -575,6 +581,10 @@ static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
> "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
> };
>
> +static char *extra_clks_for_mx7d[GPMI_CLK_MAX] = {
> + "gpmi_bch_apb",
> +};
> +
> static int gpmi_get_clks(struct gpmi_nand_data *this)
> {
> struct resources *r = &this->resources;
> @@ -592,6 +602,8 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
> /* Get extra clocks */
> if (GPMI_IS_MX6(this))
> extra_clks = extra_clks_for_mx6q;
> + if (GPMI_IS_MX7(this))
> + extra_clks = extra_clks_for_mx7d;
> if (!extra_clks)
> return 0;
>
> @@ -608,7 +620,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
> r->clock[i] = clk;
> }
>
> - if (GPMI_IS_MX6(this))
> + if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
> /*
> * Set the default value for the gpmi clock.
> *
> @@ -1869,7 +1881,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
> * (1) the chip is imx6, and
> * (2) the size of the ECC parity is byte aligned.
> */
> - if (GPMI_IS_MX6(this) &&
> + if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
> ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
> ecc->read_subpage = gpmi_ecc_read_subpage;
> chip->options |= NAND_SUBPAGE_READ;
> @@ -1936,7 +1948,8 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
> if (ret)
> goto err_out;
>
> - ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
> + ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) || GPMI_IS_MX7(this)\
> + ? 2 : 1, NULL);
> if (ret)
> goto err_out;
>
> @@ -1980,7 +1993,10 @@ static const struct of_device_id gpmi_nand_id_table[] = {
> }, {
> .compatible = "fsl,imx6sx-gpmi-nand",
> .data = &gpmi_devdata_imx6sx,
> - }, {}
> + }, {
> + .compatible = "fsl,imx7d-gpmi-nand",
> + .data = (void *)&gpmi_devdata_imx7d,
> + }
> };
> MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> index 544062f..1e105f1 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> @@ -1,7 +1,7 @@
> /*
> * Freescale GPMI NAND Flash Driver
> *
> - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
> + * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
> * Copyright (C) 2008 Embedded Alley Solutions, Inc.
> *
> * This program is free software; you can redistribute it and/or modify
> @@ -123,7 +123,8 @@ enum gpmi_type {
> IS_MX23,
> IS_MX28,
> IS_MX6Q,
> - IS_MX6SX
> + IS_MX6SX,
> + IS_MX7D
> };
>
> struct gpmi_devdata {
> @@ -306,6 +307,8 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
> #define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
> #define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
> #define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
> +#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)
>
> #define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
> +#define GPMI_IS_MX7(x) (GPMI_IS_MX7D(x))
> #endif
> --
> 1.9.1
>
More information about the linux-mtd
mailing list