[PATCH v3 1/2] mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI)

Brian Norris computersforpeace at gmail.com
Wed Aug 12 19:30:25 PDT 2015


On Thu, Jun 04, 2015 at 06:54:02PM +0200, Joachim Eastwood wrote:
> Add SPI-NOR driver for the SPI Flash Interface (SPIFI)
> controller that is found newer NXP MCU devices.
> 
> The controller supports serial SPI Flash devices with 1-, 2-
> and 4-bit width in either SPI mode 0 or 3. The controller
> can operate in either command or memory mode. In memory mode
> the Flash is exposed as normal memory and can be directly
> accessed by the CPU.
> 
> Signed-off-by: Joachim Eastwood <manabian at gmail.com>
> Reviewed-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>

Thanks for the reviews, Ezequiel. This driver is mostly looking pretty
good.

> ---
>  drivers/mtd/spi-nor/Kconfig     |  11 +
>  drivers/mtd/spi-nor/Makefile    |   1 +
>  drivers/mtd/spi-nor/nxp-spifi.c | 496 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 508 insertions(+)
>  create mode 100644 drivers/mtd/spi-nor/nxp-spifi.c
> 
> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
> index 64a4f0edabc7..407142e411fa 100644
> --- a/drivers/mtd/spi-nor/Kconfig
> +++ b/drivers/mtd/spi-nor/Kconfig
> @@ -28,4 +28,15 @@ config SPI_FSL_QUADSPI
>  	  This enables support for the Quad SPI controller in master mode.
>  	  We only connect the NOR to this controller now.
>  
> +config SPI_NXP_SPIFI
> +	tristate "NXP SPI Flash Interface (SPIFI)"
> +	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
> +	depends on HAS_IOMEM
> +	help
> +	  Enable support for the NXP LPC SPI Flash Interface controller.
> +
> +	  SPIFI is a specialized controller for connecting serial SPI
> +	  Flash. Enable this option if you have a device with a SPIFI
> +	  controller and want to access the Flash as a mtd device.
> +
>  endif # MTD_SPI_NOR
> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> index 6a7ce1462247..e53333ef8582 100644
> --- a/drivers/mtd/spi-nor/Makefile
> +++ b/drivers/mtd/spi-nor/Makefile
> @@ -1,2 +1,3 @@
>  obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
>  obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
> +obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
> diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
> new file mode 100644
> index 000000000000..8721f686ac9e
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/nxp-spifi.c
> @@ -0,0 +1,496 @@
> +/*
> + * SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
> + *
> + * Copyright (C) 2015 Joachim Eastwood <manabian at gmail.com>
> + *
> + * Based on Freescale QuadSPI driver:
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/mtd/spi-nor.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/spi/spi.h>
> +
> +/* NXP SPIFI registers, bits and macros */
> +#define SPIFI_CTRL				0x000
> +#define  SPIFI_CTRL_TIMEOUT(timeout)		(timeout)
> +#define  SPIFI_CTRL_CSHIGH(cshigh)		((cshigh) << 16)
> +#define  SPIFI_CTRL_MODE3			BIT(23)
> +#define  SPIFI_CTRL_DUAL			BIT(28)
> +#define  SPIFI_CTRL_FBCLK			BIT(30)
> +#define SPIFI_CMD				0x004
> +#define  SPIFI_CMD_DATALEN(dlen)		(dlen & 0x3fff)

Parentheses around 'dlen', to avoid macro troubles.

> +#define  SPIFI_CMD_DOUT				BIT(15)
> +#define  SPIFI_CMD_INTLEN(ilen)			((ilen) << 16)
> +#define  SPIFI_CMD_FIELDFORM(field)		((field) << 19)
> +#define  SPIFI_CMD_FIELDFORM_ALL_SERIAL		SPIFI_CMD_FIELDFORM(0x0)
> +#define  SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA	SPIFI_CMD_FIELDFORM(0x1)
> +#define  SPIFI_CMD_FRAMEFORM(frame)		((frame) << 21)
> +#define  SPIFI_CMD_FRAMEFORM_OPCODE_ONLY	SPIFI_CMD_FRAMEFORM(0x1)
> +#define  SPIFI_CMD_OPCODE(op)			((op) << 24)
> +#define SPIFI_ADDR				0x008
> +#define SPIFI_IDATA				0x00c
> +#define SPIFI_CLIMIT				0x010
> +#define SPIFI_DATA				0x014
> +#define SPIFI_MCMD				0x018
> +#define SPIFI_STAT				0x01c
> +#define  SPIFI_STAT_MCINIT			BIT(0)
> +#define  SPIFI_STAT_CMD				BIT(1)
> +#define  SPIFI_STAT_RESET			BIT(4)
> +
> +#define SPI_NOR_MAX_ID_LEN	6
> +
> +struct nxp_spifi {
> +	struct device *dev;
> +	struct clk *clk_spifi;
> +	struct clk *clk_reg;
> +	void __iomem *io_base;
> +	void __iomem *flash_base;
> +	struct mtd_info mtd;
> +	struct spi_nor nor;
> +	bool memory_mode;
> +	u32 mcmd;
> +};
> +
> +static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi)
> +{
> +	u8 stat;
> +	int ret;
> +
> +	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
> +				 !(stat & SPIFI_STAT_CMD), 10, 30);
> +	if (ret)
> +		dev_warn(spifi->dev, "command timed out\n");
> +
> +	return ret;
> +}
> +
> +static int nxp_spifi_reset(struct nxp_spifi *spifi)
> +{
> +	u8 stat;
> +	int ret;
> +
> +	writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT);
> +	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
> +				 !(stat & SPIFI_STAT_RESET), 10, 30);
> +	if (ret)
> +		dev_warn(spifi->dev, "state reset timed out\n");
> +
> +	return ret;
> +}
> +
> +static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi)
> +{
> +	int ret;
> +
> +	if (!spifi->memory_mode)
> +		return 0;
> +
> +	ret = nxp_spifi_reset(spifi);
> +	if (ret)
> +		dev_err(spifi->dev, "unable to enter command mode\n");
> +	else
> +		spifi->memory_mode = false;
> +
> +	return ret;
> +}
> +
> +static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi)
> +{
> +	u8 stat;
> +	int ret;
> +
> +	if (spifi->memory_mode)
> +		return 0;
> +
> +	writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD);
> +	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
> +				 stat & SPIFI_STAT_MCINIT, 10, 30);
> +	if (ret)
> +		dev_err(spifi->dev, "unable to enter memory mode\n");
> +	else
> +		spifi->memory_mode = true;
> +
> +	return ret;
> +}
> +
> +static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
> +{
> +	struct nxp_spifi *spifi = nor->priv;
> +	u32 cmd;
> +	int ret;
> +
> +	ret = nxp_spifi_set_memory_mode_off(spifi);
> +	if (ret)
> +		return ret;
> +
> +	cmd = SPIFI_CMD_DATALEN(len) |
> +	      SPIFI_CMD_OPCODE(opcode) |
> +	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
> +	      SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
> +	writel(cmd, spifi->io_base + SPIFI_CMD);
> +
> +	while (len--)
> +		*buf++ = readb(spifi->io_base + SPIFI_DATA);
> +
> +	return nxp_spifi_wait_for_cmd(spifi);

Hmm, I don't know this HW, but judging by the naming and structure, I'd
guess you want to "wait_for_cmd()" *before* you begin reading out data,
no? Or I may be making the wrong assumptions.

> +}
> +
> +static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
> +			       int len, int write_enable)
> +{
> +	struct nxp_spifi *spifi = nor->priv;
> +	u32 cmd;
> +	int ret;
> +
> +	ret = nxp_spifi_set_memory_mode_off(spifi);
> +	if (ret)
> +		return ret;
> +
> +	cmd = SPIFI_CMD_DOUT |
> +	      SPIFI_CMD_DATALEN(len) |
> +	      SPIFI_CMD_OPCODE(opcode) |
> +	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
> +	      SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
> +	writel(cmd, spifi->io_base + SPIFI_CMD);
> +
> +	while (len--)
> +		writeb(*buf++, spifi->io_base + SPIFI_DATA);
> +
> +	return nxp_spifi_wait_for_cmd(spifi);
> +}
> +
> +static int nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
> +			  size_t *retlen, u_char *buf)
> +{
> +	struct nxp_spifi *spifi = nor->priv;
> +	int ret;
> +
> +	ret = nxp_spifi_set_memory_mode_on(spifi);
> +	if (ret)
> +		return ret;
> +
> +	memcpy_fromio(buf, spifi->flash_base + from, len);
> +	*retlen += len;
> +
> +	return 0;
> +}
> +
> +static void nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
> +			    size_t *retlen, const u_char *buf)
> +{
> +	struct nxp_spifi *spifi = nor->priv;
> +	u32 cmd;
> +	int ret;
> +
> +	ret = nxp_spifi_set_memory_mode_off(spifi);
> +	if (ret) {
> +		*retlen = 0;
> +		return;
> +	}
> +
> +	writel(to, spifi->io_base + SPIFI_ADDR);
> +	*retlen = len;
> +
> +	cmd = SPIFI_CMD_DOUT |
> +	      SPIFI_CMD_DATALEN(len) |
> +	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
> +	      SPIFI_CMD_OPCODE(nor->program_opcode) |
> +	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
> +	writel(cmd, spifi->io_base + SPIFI_CMD);
> +
> +	while (len--)
> +		writeb(*buf++, spifi->io_base + SPIFI_DATA);
> +
> +	nxp_spifi_wait_for_cmd(spifi);
> +}
> +
> +static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
> +{
> +	struct nxp_spifi *spifi = nor->priv;
> +	u32 cmd;
> +	int ret;
> +
> +	ret = nxp_spifi_set_memory_mode_off(spifi);
> +	if (ret)
> +		return ret;
> +
> +	writel(offs, spifi->io_base + SPIFI_ADDR);
> +
> +	cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
> +	      SPIFI_CMD_OPCODE(nor->erase_opcode) |
> +	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
> +	writel(cmd, spifi->io_base + SPIFI_CMD);
> +
> +	return nxp_spifi_wait_for_cmd(spifi);
> +}
> +
> +static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
> +{
> +	switch (spifi->nor.flash_read) {
> +	case SPI_NOR_NORMAL:
> +	case SPI_NOR_FAST:
> +		spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
> +		break;
> +	case SPI_NOR_DUAL:
> +	case SPI_NOR_QUAD:
> +		spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
> +		break;
> +	default:
> +		dev_err(spifi->dev, "unsupported spi read mode\n");

s/spi/SPI/

> +		return -EINVAL;
> +	}
> +
> +	/* Memory mode supports address length between 1 and 4 */
> +	if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
> +		return -EINVAL;
> +
> +	spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
> +		       SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
> +		       SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
> +
> +	return 0;
> +}
> +
> +static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
> +{
> +	u8 id[SPI_NOR_MAX_ID_LEN];
> +	nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
> +}
> +
> +static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
> +				 struct device_node *np)
> +{
> +	struct mtd_part_parser_data ppdata;
> +	enum read_mode flash_read;
> +	char *flash_name = NULL;
> +	u32 ctrl, property;
> +	char modalias[40];
> +	u16 mode = 0;
> +	int ret;
> +
> +	if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) {
> +		switch (property) {
> +		case 1:
> +			break;
> +		case 2:
> +			mode |= SPI_RX_DUAL;
> +			break;
> +		case 4:
> +			mode |= SPI_RX_QUAD;
> +			break;
> +		default:
> +			dev_err(spifi->dev, "unsupported rx-bus-width\n");
> +			return -EINVAL;
> +		}
> +	}
> +
> +	if (of_find_property(np, "spi-cpha", NULL))
> +		mode |= SPI_CPHA;
> +
> +	if (of_find_property(np, "spi-cpol", NULL))
> +		mode |= SPI_CPOL;
> +
> +	/* Setup control register defaults */
> +	ctrl = SPIFI_CTRL_TIMEOUT(1000) |
> +	       SPIFI_CTRL_CSHIGH(15) |
> +	       SPIFI_CTRL_FBCLK;
> +
> +	if (mode & SPI_RX_DUAL) {
> +		ctrl |= SPIFI_CTRL_DUAL;
> +		flash_read = SPI_NOR_DUAL;
> +	} else if (mode & SPI_RX_QUAD) {
> +		ctrl &= ~SPIFI_CTRL_DUAL;
> +		flash_read = SPI_NOR_QUAD;
> +	} else {
> +		ctrl |= SPIFI_CTRL_DUAL;
> +		flash_read = SPI_NOR_NORMAL;
> +	}
> +
> +	switch (mode & (SPI_CPHA | SPI_CPOL)) {
> +	case SPI_MODE_0:
> +		ctrl &= ~SPIFI_CTRL_MODE3;
> +		break;
> +	case SPI_MODE_3:
> +		ctrl |= SPIFI_CTRL_MODE3;
> +		break;
> +	default:
> +		dev_err(spifi->dev, "only mode 0 and 3 supported\n");
> +		return -EINVAL;
> +	}
> +
> +	writel(ctrl, spifi->io_base + SPIFI_CTRL);
> +
> +	spifi->mtd.priv  = &spifi->nor;

Please drop this line. You're violating the layering here, where
spi-nor.c gets the privilege of setting this field.

> +	spifi->nor.mtd   = &spifi->mtd;
> +	spifi->nor.dev   = spifi->dev;
> +	spifi->nor.priv  = spifi;
> +	spifi->nor.read  = nxp_spifi_read;
> +	spifi->nor.write = nxp_spifi_write;
> +	spifi->nor.erase = nxp_spifi_erase;
> +	spifi->nor.read_reg  = nxp_spifi_read_reg;
> +	spifi->nor.write_reg = nxp_spifi_write_reg;
> +
> +	ret = of_modalias_node(np, modalias, sizeof(modalias));
> +	if (ret < 0) {
> +		dev_err(spifi->dev, "unable to get device modalias\n");
> +		return ret;
> +	}
> +
> +	/* Use auto detect unless chip is specified */
> +	if (strcmp(modalias, "spi-nor"))
> +		flash_name = modalias;

Do you have a good reason to specify a non-NULL flash_name? Mostly
curious, since AFAIK, almost all new flash can be identified by their ID
string, and so we can just pass NULL to spi_nor_scan().

> +
> +	/*
> +	 * The first read on a hard reset isn't reliable so do a
> +	 * dummy read of the id before calling spi_nor_scan().
> +	 * The reason for this problem is unknown.
> +	 *
> +	 * The official NXP spifilib uses more or less the same
> +	 * workaround that is applied here by reading the device
> +	 * id multiple times.
> +	 */
> +	nxp_spifi_dummy_id_read(&spifi->nor);
> +
> +	ret = spi_nor_scan(&spifi->nor, flash_name, flash_read);
> +	if (ret) {
> +		dev_err(spifi->dev, "device scan failed\n");
> +		return ret;
> +	}
> +
> +	ret = nxp_spifi_setup_memory_cmd(spifi);
> +	if (ret) {
> +		dev_err(spifi->dev, "memory command setup failed\n");
> +		return ret;
> +	}
> +
> +	ppdata.of_node = np;
> +	ret = mtd_device_parse_register(&spifi->mtd, NULL, &ppdata, NULL, 0);
> +	if (ret) {
> +		dev_err(spifi->dev, "mtd device parse failed\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int nxp_spifi_probe(struct platform_device *pdev)
> +{
> +	struct device_node *flash_np;
> +	struct nxp_spifi *spifi;
> +	struct resource *res;
> +	int ret;
> +
> +	spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL);
> +	if (!spifi)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi");
> +	spifi->io_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(spifi->io_base))
> +		return PTR_ERR(spifi->io_base);
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash");
> +	spifi->flash_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(spifi->flash_base))
> +		return PTR_ERR(spifi->flash_base);
> +
> +	spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
> +	if (IS_ERR(spifi->clk_spifi)) {
> +		dev_err(&pdev->dev, "spifi clock not found\n");
> +		return PTR_ERR(spifi->clk_spifi);
> +	}
> +
> +	spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
> +	if (IS_ERR(spifi->clk_reg)) {
> +		dev_err(&pdev->dev, "reg clock not found\n");
> +		return PTR_ERR(spifi->clk_reg);
> +	}
> +
> +	ret = clk_prepare_enable(spifi->clk_reg);
> +	if (ret) {
> +		dev_err(&pdev->dev, "unable to enable reg clock\n");
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(spifi->clk_spifi);
> +	if (ret) {
> +		dev_err(&pdev->dev, "unable to enable spifi clock\n");
> +		goto dis_clk_reg;
> +	}
> +
> +	spifi->dev = &pdev->dev;
> +	platform_set_drvdata(pdev, spifi);
> +
> +	/* Initialize and reset device */
> +	nxp_spifi_reset(spifi);
> +	writel(0, spifi->io_base + SPIFI_IDATA);
> +	writel(0, spifi->io_base + SPIFI_MCMD);
> +	nxp_spifi_reset(spifi);
> +
> +	flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
> +	if (!flash_np) {
> +		dev_err(&pdev->dev, "no spi flash device to configure\n");

s/spi/SPI/

> +		ret = -ENODEV;
> +		goto dis_clks;
> +	}
> +
> +	ret = nxp_spifi_setup_flash(spifi, flash_np);
> +	if (ret) {
> +		dev_err(&pdev->dev, "unable to setup flash chip\n");
> +		goto dis_clks;
> +	}
> +
> +	return 0;
> +
> +dis_clks:
> +	clk_disable_unprepare(spifi->clk_spifi);
> +dis_clk_reg:
> +	clk_disable_unprepare(spifi->clk_reg);
> +	return ret;
> +}
> +
> +static int nxp_spifi_remove(struct platform_device *pdev)
> +{
> +	struct nxp_spifi *spifi = platform_get_drvdata(pdev);
> +
> +	mtd_device_unregister(&spifi->mtd);
> +	clk_disable_unprepare(spifi->clk_spifi);
> +	clk_disable_unprepare(spifi->clk_reg);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id nxp_spifi_match[] = {
> +	{.compatible = "nxp,lpc1773-spifi"},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, nxp_spifi_match);
> +
> +static struct platform_driver nxp_spifi_driver = {
> +	.probe	= nxp_spifi_probe,
> +	.remove	= nxp_spifi_remove,
> +	.driver	= {
> +		.name = "nxp-spifi",
> +		.of_match_table = nxp_spifi_match,
> +	},
> +};
> +module_platform_driver(nxp_spifi_driver);
> +
> +MODULE_DESCRIPTION("NXP SPI Flash Interface driver");
> +MODULE_AUTHOR("Joachim Eastwood <manabian at gmail.com>");
> +MODULE_LICENSE("GPL v2");

With that:

Reviewed-by: Brian Norris <computersforpeace at gmail.com>

and I hope to be able to merge your next revision.

Thanks,
Brian



More information about the linux-mtd mailing list