[PATCH 5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB

Ezequiel Garcia ezequiel.garcia at free-electrons.com
Wed Mar 12 11:16:43 EDT 2014


The Armada 385-DB board has a NAND flash, so enable it in the
devicetree and add the partitions as prepared in the factory images.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 arch/arm/boot/dts/armada-385-db.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index 9a13642..b21e9b2 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -80,6 +80,27 @@
 					reg = <1>;
 				};
 			};
+
+			nand: nand at d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition at 0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition at 800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition at 1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
 		};
 
 		pcie-controller {
-- 
1.9.0




More information about the linux-mtd mailing list