[PATCH] Documentation: mtd: update the document for m25p80

[Huang Shijie]

The m25p80.c has used the SPI NOR framework now, and the m25p_ids has
been moved to spi-nor.c and renamed to spi_nor_ids.

This patch updates the document for m25p80.

Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
 Documentation/devicetree/bindings/mtd/m25p80.txt |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/m25p80.txt
index 6d3d576..4611aa8 100644
--- a/Documentation/devicetree/bindings/mtd/m25p80.txt
+++ b/Documentation/devicetree/bindings/mtd/m25p80.txt
@@ -5,8 +5,8 @@ Required properties:
   representing partitions.
 - compatible : Should be the manufacturer and the name of the chip. Bear in mind
                the DT binding is not Linux-only, but in case of Linux, see the
-               "m25p_ids" table in drivers/mtd/devices/m25p80.c for the list of
-               supported chips.
+               "spi_nor_ids" table in drivers/mtd/spi-nor/spi-nor.c for the list
+               of supported chips.
 - reg : Chip-Select number
 - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
 
-- 
1.7.2.rc3