[PATCH v5 02/14] mtd: nand: pxa3xx: Use waitfunc() to wait for the device to be ready

Ezequiel Garcia ezequiel.garcia at free-electrons.com
Thu Nov 14 16:25:27 EST 2013


In pxa3xx_nand_sensing() instead of simply using info->is_ready
after issuing a command, the correct way of checking is to wait
for the device to be ready through the chip's waitfunc().

Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 drivers/mtd/nand/pxa3xx_nand.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index ea2f907..8af4746 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1040,10 +1040,11 @@ static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
 		return ret;
 
 	chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
-	if (!info->need_wait)
-		return 0;
+	ret = chip->waitfunc(mtd, chip);
+	if (ret & NAND_STATUS_FAIL)
+		return -ENODEV;
 
-	return -ENODEV;
+	return 0;
 }
 
 static int pxa3xx_nand_scan(struct mtd_info *mtd)
-- 
1.8.1.5




More information about the linux-mtd mailing list