[PATCH 18/23] mtd: lpc32xx_mlc: Remove unnecessary OOM messages

[Roland Stigge]

On 26/12/13 04:18, Jingoo Han wrote:
> The site-specific OOM messages are unnecessary, because they
> duplicate the MM subsystem generic OOM message.
> 
> Signed-off-by: Jingoo Han <jg1.han at samsung.com>

Acked-by: Roland Stigge <stigge at antcom.de>

> ---
>  drivers/mtd/nand/lpc32xx_mlc.c |   10 ++--------
>  1 file changed, 2 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
> index 48be850..687478c 100644
> --- a/drivers/mtd/nand/lpc32xx_mlc.c
> +++ b/drivers/mtd/nand/lpc32xx_mlc.c
> @@ -613,10 +613,8 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
>  	struct device_node *np = dev->of_node;
>  
>  	ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
> -	if (!ncfg) {
> -		dev_err(dev, "could not allocate memory for platform data\n");
> +	if (!ncfg)
>  		return NULL;
> -	}
>  
>  	of_property_read_u32(np, "nxp,tcea-delay", &ncfg->tcea_delay);
>  	of_property_read_u32(np, "nxp,busy-delay", &ncfg->busy_delay);
> @@ -652,10 +650,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
>  
>  	/* Allocate memory for the device structure (and zero it) */
>  	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
> -	if (!host) {
> -		dev_err(&pdev->dev, "failed to allocate device structure.\n");
> +	if (!host)
>  		return -ENOMEM;
> -	}
>  
>  	rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	host->io_base = devm_ioremap_resource(&pdev->dev, rc);
> @@ -750,14 +746,12 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
>  
>  	host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
>  	if (!host->dma_buf) {
> -		dev_err(&pdev->dev, "Error allocating dma_buf memory\n");
>  		res = -ENOMEM;
>  		goto err_exit3;
>  	}
>  
>  	host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
>  	if (!host->dummy_buf) {
> -		dev_err(&pdev->dev, "Error allocating dummy_buf memory\n");
>  		res = -ENOMEM;
>  		goto err_exit3;
>  	}
>