ubiattach issue

[Dimitar Penev]

Hi Vikram,

Thank you for your response.

It is a check out from http://git.infradead.org/?p=mtd-utils.git
Git signature 36d8de81049c9c908740b690c664b5bd3703ccd6

If you expect version in a different format please let me know what to 
check.

Best Regards
Dimitar

----- Original Message ----- 
From: "Vikram Narayanan" <vikram186 at gmail.com>
To: "Dimitar Penev" <dpn at switchfin.org>
Cc: <linux-mtd at lists.infradead.org>
Sent: Thursday, September 20, 2012 9:25 PM
Subject: Re: ubiattach issue


> On 9/20/2012 2:14 PM, Dimitar Penev wrote:
>> Hi Gents,
>>
>> I am facing an issue with ubiattach on Linux kernel 3.0.8
>> On our target we have nand flash with mtd layer on top.
>> The logs attached below.
>>
>> Can you please give me a pointer?
>>
>>
>> /bin # ubinfo -a
>> UBI version: 1
>> Count of UBI devices: 0
>> UBI control device major/minor: 10:62
>>
>> /bin # ubiformat /dev/mtd5 -y --vid-hdr-offset="2048"
>> ubiformat: mtd5 (nand), size 511705088 bytes (488.0 MiB), 3904
>> eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
>> libscan: scanning eraseblock 3903 -- 100 % complete
>> ubiformat: 3904 eraseblocks have valid erase counter, mean value is 3
>> ubiformat: formatting eraseblock 3903 -- 100 % complete
>>
>> /bin # ubiattach /dev/ubi_ctrl --mtdn=5 --devn=0 --vid-hdr-offset="2048"
>> ubiattach: error!: cannot attach mtd5
>> error 25 (Inappropriate ioctl for device)
>
> Before any pointers, which version of mtd-utils are you using?
> How to:
> (http://linux-mtd.infradead.org/faq/general.html#L_compile_mtd)
>
> ~Vikram
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>