[PATCH 8/8] mtd_nandbiterrs: Replace msg macro with pr_info
Vikram Narayanan
vikram186 at gmail.com
Tue Oct 2 10:33:45 EDT 2012
Remove msg macro and use pr_fmt to add the prefix
Signed-off-by: Vikram Narayanan <vikram186 at gmail.com>
---
drivers/mtd/tests/mtd_nandbiterrs.c | 68 +++++++++++++++++-----------------
1 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/mtd/tests/mtd_nandbiterrs.c b/drivers/mtd/tests/mtd_nandbiterrs.c
index 072fc43..b94c4ac 100644
--- a/drivers/mtd/tests/mtd_nandbiterrs.c
+++ b/drivers/mtd/tests/mtd_nandbiterrs.c
@@ -39,6 +39,9 @@
* this program; see the file COPYING. If not, write to the Free Software
* Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -48,8 +51,6 @@
#include <linux/slab.h>
#include "mtd_tests.h"
-#define msg(FMT, VA...) pr_info("mtd_nandbiterrs: "FMT, ##VA)
-
static int dev;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -105,11 +106,11 @@ static int write_page(int log)
size_t written;
if (log)
- msg("write_page\n");
+ pr_info("write_page\n");
err = mtd_write(mtd, offset, mtd->writesize, &written, wbuffer);
if (err || written != mtd->writesize) {
- msg("error: write failed at %#llx\n", (long long)offset);
+ pr_info("error: write failed at %#llx\n", (long long)offset);
if (!err)
err = -EIO;
}
@@ -124,7 +125,7 @@ static int rewrite_page(int log)
struct mtd_oob_ops ops;
if (log)
- msg("rewrite page\n");
+ pr_info("rewrite page\n");
ops.mode = MTD_OPS_RAW; /* No ECC */
ops.len = mtd->writesize;
@@ -137,7 +138,7 @@ static int rewrite_page(int log)
err = mtd_write_oob(mtd, offset, &ops);
if (err || ops.retlen != mtd->writesize) {
- msg("error: write_oob failed (%d)\n", err);
+ pr_info("error: write_oob failed (%d)\n", err);
if (!err)
err = -EIO;
}
@@ -154,7 +155,7 @@ static int read_page(int log)
struct mtd_ecc_stats oldstats;
if (log)
- msg("read_page\n");
+ pr_info("read_page\n");
/* Saving last mtd stats */
memcpy(&oldstats, &mtd->ecc_stats, sizeof(oldstats));
@@ -164,7 +165,7 @@ static int read_page(int log)
err = mtd->ecc_stats.corrected - oldstats.corrected;
if (err < 0 || read != mtd->writesize) {
- msg("error: read failed at %#llx\n", (long long)offset);
+ pr_info("error: read failed at %#llx\n", (long long)offset);
if (err >= 0)
err = -EIO;
}
@@ -178,11 +179,11 @@ static int verify_page(int log)
unsigned i, errs = 0;
if (log)
- msg("verify_page\n");
+ pr_info("verify_page\n");
for (i = 0; i < mtd->writesize; i++) {
if (rbuffer[i] != hash(i+seed)) {
- msg("Error: page offset %u, expected %02x, got %02x\n",
+ pr_info("Error: page offset %u, expected %02x, got %02x\n",
i, hash(i+seed), rbuffer[i]);
errs++;
}
@@ -207,13 +208,13 @@ static int insert_biterror(unsigned byte)
for (bit = 7; bit >= 0; bit--) {
if (CBIT(wbuffer[byte], bit)) {
BCLR(wbuffer[byte], bit);
- msg("Inserted biterror @ %u/%u\n", byte, bit);
+ pr_info("Inserted biterror @ %u/%u\n", byte, bit);
return 0;
}
}
byte++;
}
- msg("biterror: Failed to find a '1' bit\n");
+ pr_info("biterror: Failed to find a '1' bit\n");
return -EIO;
}
@@ -225,7 +226,7 @@ static int incremental_errors_test(void)
unsigned i;
unsigned errs_per_subpage = 0;
- msg("incremental biterrors test\n");
+ pr_info("incremental biterrors test\n");
for (i = 0; i < mtd->writesize; i++)
wbuffer[i] = hash(i+seed);
@@ -242,9 +243,9 @@ static int incremental_errors_test(void)
err = read_page(1);
if (err > 0)
- msg("Read reported %d corrected bit errors\n", err);
+ pr_info("Read reported %d corrected bit errors\n", err);
if (err < 0) {
- msg("After %d biterrors per subpage, read reported error %d\n",
+ pr_info("After %d biterrors per subpage, read reported error %d\n",
errs_per_subpage, err);
err = 0;
goto exit;
@@ -252,11 +253,11 @@ static int incremental_errors_test(void)
err = verify_page(1);
if (err) {
- msg("ECC failure, read data is incorrect despite read success\n");
+ pr_info("ECC failure, read data is incorrect despite read success\n");
goto exit;
}
- msg("Successfully corrected %d bit errors per subpage\n",
+ pr_info("Successfully corrected %d bit errors per subpage\n",
errs_per_subpage);
for (i = 0; i < subcount; i++) {
@@ -288,7 +289,7 @@ static int overwrite_test(void)
memset(bitstats, 0, sizeof(bitstats));
- msg("overwrite biterrors test\n");
+ pr_info("overwrite biterrors test\n");
for (i = 0; i < mtd->writesize; i++)
wbuffer[i] = hash(i+seed);
@@ -306,18 +307,18 @@ static int overwrite_test(void)
err = read_page(0);
if (err >= 0) {
if (err >= MAXBITS) {
- msg("Implausible number of bit errors corrected\n");
+ pr_info("Implausible number of bit errors corrected\n");
err = -EIO;
break;
}
bitstats[err]++;
if (err > max_corrected) {
max_corrected = err;
- msg("Read reported %d corrected bit errors\n",
+ pr_info("Read reported %d corrected bit errors\n",
err);
}
} else { /* err < 0 */
- msg("Read reported error %d\n", err);
+ pr_info("Read reported error %d\n", err);
err = 0;
break;
}
@@ -325,7 +326,7 @@ static int overwrite_test(void)
err = verify_page(0);
if (err) {
bitstats[max_corrected] = opno;
- msg("ECC failure, read data is incorrect despite read success\n");
+ pr_info("ECC failure, read data is incorrect despite read success\n");
break;
}
@@ -334,9 +335,9 @@ static int overwrite_test(void)
/* At this point bitstats[0] contains the number of ops with no bit
* errors, bitstats[1] the number of ops with 1 bit error, etc. */
- msg("Bit error histogram (%d operations total):\n", opno);
+ pr_info("Bit error histogram (%d operations total):\n", opno);
for (i = 0; i < max_corrected; i++)
- msg("Page reads with %3d corrected bit errors: %d\n",
+ pr_info("Page reads with %3d corrected bit errors: %d\n",
i, bitstats[i]);
exit:
@@ -347,36 +348,35 @@ static int __init mtd_nandbiterrs_init(void)
{
int err = 0;
- msg("\n");
- msg("==================================================\n");
- msg("MTD device: %d\n", dev);
+ printk(KERN_INFO "\n==================================================\n");
+ pr_info("MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
- msg("error: cannot get MTD device\n");
+ pr_info("error: cannot get MTD device\n");
goto exit_mtddev;
}
if (mtd->type != MTD_NANDFLASH) {
- msg("this test requires NAND flash\n");
+ pr_info("this test requires NAND flash\n");
err = -ENODEV;
goto exit_nand;
}
- msg("MTD device size %llu, eraseblock=%u, page=%u, oob=%u\n",
+ pr_info("MTD device size %llu, eraseblock=%u, page=%u, oob=%u\n",
(unsigned long long)mtd->size, mtd->erasesize,
mtd->writesize, mtd->oobsize);
subsize = mtd->writesize >> mtd->subpage_sft;
subcount = mtd->writesize / subsize;
- msg("Device uses %d subpages of %d bytes\n", subcount, subsize);
+ pr_info("Device uses %d subpages of %d bytes\n", subcount, subsize);
offset = page_offset * mtd->writesize;
eraseblock = mtd_div_by_eb(offset, mtd);
- msg("Using page=%u, offset=%llu, eraseblock=%u\n",
+ pr_info("Using page=%u, offset=%llu, eraseblock=%u\n",
page_offset, offset, eraseblock);
wbuffer = kmalloc(mtd->writesize, GFP_KERNEL);
@@ -409,8 +409,8 @@ static int __init mtd_nandbiterrs_init(void)
goto exit_error;
err = -EIO;
- msg("finished successfully.\n");
- msg("==================================================\n");
+ pr_info("finished successfully.\n");
+ printk(KERN_INFO "==================================================\n");
exit_error:
kfree(rbuffer);
--
1.7.4.1
More information about the linux-mtd
mailing list