[oselas] Mini2440 boot failure on kernel 3.7-rc1

[Sylwester Nawrocki]

Hi Brian,

On 11/13/2012 08:54 AM, Brian Norris wrote:
> On Mon, Nov 12, 2012 at 3:18 PM, Sylwester Nawrocki
> <sylvester.nawrocki at gmail.com>  wrote:
>> On 10/22/2012 09:28 AM, Juergen Beisert wrote:
>>> Sylwester Nawrocki wrote:
>>>>
>>>> [...]
>>>> [    2.455000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung
>>>> NAND 128MiB 3,3V 8-bit), 8
>>>> [    2.460000] 4 cmdlinepart partitions found on MTD device nand
>>>> [    2.465000] Creating 4 MTD partitions on "nand":
>>>> [    2.470000] 0x000000000000-0x000000080000 : "barebox"
>>>> [    2.475000] mtd: partition "barebox" doesn't end on an erase block --
>>>> force read-only
>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>> This "force read-only" doesn't happen with v3.6.
>>>
>>> This looks to me the NAND database uses a wrong block size for this NAND
>>> device. This device has 128 kiB block sizes. So, a 512 kiB partition
>>> *is* block aligned.
>>>
>>> Maybe you should take a look into the generic code, what block size the
>>> 3.7-rc1 uses for this NAND.
>>
>> Thanks a lot for these pointers. I've found that the commit causing this
>> regression is this one:
>>
>> commit e2d3a35ee427aaba99b6c68a56609ce276c51270
>> Author: Brian Norris<computersforpeace at gmail.com>
>> Date:   Mon Sep 24 20:40:55 2012 -0700
>>
>>      mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID
>
> Yes, this patch is already known to cause at least one type of
> regression. There's been a fix for a while but David still has
> neglected to send it to Linus. It seems that you have quoted it below,
> though, and it may not fix your particular regression.

No, it wasn't helpful for me.

>> When I revert it the crash is gone and everything works well. The Flash
>> chip is K9F1G08U0C and according to the datasheet it has 5 byte ID.
>> However nand_id_len() returns 6 and id_data[] is: ec, f1, 00, 95, 40, ec.
>
> Samsung seems to have created some problems by under-specifying the ID
> on their NAND. Your NAND is not detected as 5-byte ID for good reason:
> the ID wraps around after 6 bytes, not 5. But that's partly
> speculation, as you have not provided the full ID.
>
> Can you please list a full 8-byte string of id_data[]? This will be
> very helpful. I know of at least one solution that will fix your
> problem, but I need to know your full ID to help lay this issue to
> rest for good.

Indeed, I wish there was good hardware documentation, still it seems
an exception rather than a rule for some hardware vendors...

Here is my id_data[] dump:

ec, f1, 00, 95, 40, ec, ec, f1

Looks a bit strange, I hope you know how to handle this. :)

>> I've found a mail thread where similar issue has been discussed [1]. It
>> seems
>> the mentioned chunk in commit
>> "mtd: nand: add generic READ ID length calculation functions"
>>
>> is missing. Still it doesn't fix the problem for me.
>>
>> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
>> index ec6841d..93d6df3 100644
>> --- a/drivers/mtd/nand/nand_base.c
>> +++ b/drivers/mtd/nand/nand_base.c
>> @@ -2989,7 +2989,8 @@ static void nand_decode_ext_id(struct mtd_info *mtd,
>> struct nand_chip *chip,
>>           * Check for ID length, cell type, and Hynix/Samsung ID to decide
>> what
>>           * to do.
>>           */
>> -       if (id_len == 6&&  id_data[0] == NAND_MFR_SAMSUNG) {
>> +       if (id_len == 6&&  id_data[0] == NAND_MFR_SAMSUNG&&
>> +           id_data[5] != 0x00) {
>>                  /* Calc pagesize */
>>                  mtd->writesize = 2048<<  (extid&  0x03);
>>                  extid>>= 2;
>>
> ...
>> The following change eliminates the problem for this particular chip,
>> however it will likely break others.
>>
>>  From efab2f7d0a9049588c8b155fab21f8f8c2433b19 Mon Sep 17 00:00:00 2001
>> From: Sylwester Nawrocki<sylvester.nawrocki at gmail.com>
>> Date: Tue, 13 Nov 2012 00:10:06 +0100
>> Subject: [PATCH] mtd: Change calculation of length of nand id with repeated
>> pattern
>>
>> Corrects ID length calculation for Samsung K9F1G08U0C NAND Flash,
>> ID: [ec, f1, 00, 95, 40], ec.
>>
>> Signed-off-by: Sylwester Nawrocki<sylvester.nawrocki at gmail.com>
>> ---
>>   drivers/mtd/nand/nand_base.c |    2 +-
>>   1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
>> index ec6841d..884e951 100644
>> --- a/drivers/mtd/nand/nand_base.c
>> +++ b/drivers/mtd/nand/nand_base.c
>> @@ -2954,7 +2954,7 @@ static int nand_id_len(u8 *id_data, int arrlen)
>>
>>          /* There's a repeated pattern */
>>          if (period<  arrlen)
>> -               return period;
>> +               return period - 1;
>>
>>          /* There are trailing zeros */
>>          if (last_nonzero<  arrlen - 1)
>
> You're right, this patch is not correct. The period of repetition
> *should* be equal to the ID length, but it seems in your case that
> your NAND repeats at 'period + 1'. So we have to figure out something
> else.

OK. BTW, is this comment in drivers/mtd/nand_base.c

/*
  * nand_id_has_period - Check if an ID string has a given wraparound period
  ...
  * specific repetition interval period (e.g., {0x20,0x01,0x7F,0x20} has a
  * period of 2). This is a helper function for nand_id_len(). Returns 
non-zero
  ...

correct ? Shouldn't it be "has a period of 3" ? Since there are 3 different
values and then it repeats starting with 0x20 ?

--

Thanks,
Sylwester