[PATCH] mtd: gpmi: Always report ECC stats and return max_bitflips

[Artem Bityutskiy]

On Mon, 2012-12-10 at 09:18 -0600, Zach Sadecki wrote:
> Always report corrected and failed ECC stats back up to the MTD layer.  Also
> return max_bitflips from read_page() as is expected from NAND drivers now.
> 
> Signed-off-by: Zach Sadecki <zsadecki at itwatchdogs.com>
> Acked-by: Huang Shijie <b32955 at freescale.com>
> ---

Dunno, may be your patch is corrupted or something. Try to save it and
apply. This is what I get:

$ git apply --check ~/tmp/zach.mbox
error: patch failed: drivers/mtd/nand/gpmi-nand/gpmi-nand.c:921
error: drivers/mtd/nand/gpmi-nand/gpmi-nand.c: patch does not apply

$ git log -1 --oneline
70df8b3 mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems

I've attached the zach.mbox file for you.

-- 
Best Regards,
Artem Bityutskiy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: zach.mbox.gz
Type: application/x-gzip
Size: 1814 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20121213/73d7a1f5/attachment.gz>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20121213/73d7a1f5/attachment.sig>