[PATCH v2 2/4] mtd: nand: convert printk() to pr_*()

[Artem Bityutskiy]

Brian, would you please send a new series? I suggest you the following
order of things.

1. clean-up of non-DEBUG() messages.
   1.1. go through all printks and check if KERN_* is ok, fix. E.g.,
        I can see that all KERN_DEBUG should become KERN_INFO
   1.2. go through all printks and check if the function name prefix
        makes sense there - kill those which do not.

   Also, while doing this, keep in mind that messages will be later
   turned into dev_* (dev_info(), dev_err(), etc) so they will be
   automatically prefixed with the device name which is already some
   identification of the source of the message.

   1.3. turn messages to dev_*
   1.4. make another pass and do all the lines consolidations,
        alignments, punctuation, etc etc.

2. clean-up of DEBUG() cruft.
   2.1 change DEBUG() with dev_dbg()

   Kill all function name prefixes as well. The rationale is: dev_dbg()
   already adds function name prefixe (and process id) if dynamic
   debugging is enabled. In case of debugging with DEBUG macro, you
   anyway have to change the code (adding #define DEBUG) so you might
   easily defind pr_fmt at the same time for youself.

How does this sound to you?

FWIW: I've moved the patches I pushed from the master branch to the
"brian" branch of l2-mtd-2.6.git tree. But they will not be useful
for you, I guess.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)