[PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip

Scott Wood scottwood at freescale.com
Thu Dec 15 12:32:40 EST 2011


On 12/14/2011 10:59 PM, Li Yang wrote:
> The limitation of the proposed bad block marker migration is that you
> need to make sure the migration is done and only done once.  If it is
> done more than once, the factory bad block marker is totally messed
> up.  It requires a complex mechanism to automatically guarantee the
> migration is only done once, and it still won't be 100% safe.
> 
> I would suggest we use a much easier compromise that we form the BBT
> base on the factory bad block marker on first use of the flash, and
> after that the factory bad block marker is dropped.  We just relies on
> the BBT for information about bad blocks.  Although by doing so we
> can't regenerate the BBT again,  as there is mirror for the BBT I
> don't think we have too much risk.

I have corrupted the BBT too often during development (e.g. a bug makes
all accesses fail, so the upper layers decide to mark everything bad) to
be comfortable with this.

Elsewhere in the thread I suggested a way to let the marker be in either
the bbt or in a dedicated block, depending on whether it's a development
situation where the BBT needs to be erasable.

-Scott




More information about the linux-mtd mailing list