[PATCH v10 1/3] MTD : add the common code for GPMI-NAND controller driver

Marek Vasut marek.vasut at gmail.com
Fri Aug 26 11:12:54 EDT 2011


On Wednesday, August 24, 2011 09:33:22 AM Huang Shijie wrote:
> These files contain the common code for the GPMI-NAND driver.
> 
> Signed-off-by: Huang Shijie <b32955 at freescale.com>

[...]

Hi Huang, please don't forget to CC me next time, but there will be next time 
for this patch I guess ;-)

> +int start_dma_without_bch_irq(struct gpmi_nand_data *this,
> +				struct dma_async_tx_descriptor *desc)
> +{
> +	struct completion *dma_c = &this->dma_done;
> +	int err;
> +
> +	init_completion(dma_c);
> +
> +	desc->callback		= dma_irq_callback;
> +	desc->callback_param	= this;
> +	dmaengine_submit(desc);
> +
> +	/* Wait for the interrupt from the DMA block. */
> +	err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
> +	err = (!err) ? -ETIMEDOUT : 0;

This might need a tiny correction.

> +	if (err) {
> +		pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type);
> +		if (gpmi_debug & GPMI_DEBUG_VERBOSE)
> +			gpmi_dump_info(this);
> +	}
> +	return err;
> +}

But that's a minor thing. Even like this:

Acked-by: Marek Vasut <marek.vasut at gmail.com>



More information about the linux-mtd mailing list