[PATCH 5/5] pxa3xx_nand: set oob length in the runtime

Eric Miao eric.y.miao at gmail.com
Mon Aug 23 04:20:13 EDT 2010


On Wed, Aug 18, 2010 at 10:36 PM, Haojian Zhuang
<haojian.zhuang at gmail.com> wrote:
> From 85d8cdc6774445d3ec7842de5227e9798f13efa3 Mon Sep 17 00:00:00 2001
> From: Lei Wen <leiwen at marvell.com>
> Date: Tue, 17 Aug 2010 14:09:30 +0800
> Subject: [PATCH 5/5] pxa3xx_nand: set oob length in the runtime
>
> For different command need different oob requirement, set the proper
> oob length by different cmd.
>
> Signed-off-by: Lei Wen <leiwen at marvell.com>

Acked-by: Eric Miao <eric.y.miao at gmail.com>

> ---
>  drivers/mtd/nand/pxa3xx_nand.c |   25 ++++++++++++++++++-------
>  1 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index dce9407..5d24968 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -273,13 +273,20 @@ static int wait_for_event(struct
> pxa3xx_nand_info *info, uint32_t event)
>
>  static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
>  {
> -       /* calculate data size */
> +       int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
> +
> +       info->data_size = info->page_size;
> +       if (!oob_enable) {
> +               info->oob_size = 0;
> +               return;
> +       }
> +
>        switch (info->page_size) {
>        case 2048:
> -               info->data_size = (info->use_ecc) ? 2088 : 2112;
> +               info->oob_size = (info->use_ecc) ? 40 : 64;
>                break;
>        case 512:
> -               info->data_size = (info->use_ecc) ? 520 : 528;
> +               info->oob_size = (info->use_ecc) ? 8 : 16;
>                break;
>        }
>  }
> @@ -333,6 +340,7 @@ static int prepare_other_cmd(struct
> pxa3xx_nand_info *info, uint16_t cmd)
>        info->ndcb1 = 0;
>        info->ndcb2 = 0;
>
> +       info->oob_size = 0;
>        if (cmd == cmdset->read_id) {
>                info->ndcb0 |= NDCB0_CMD_TYPE(3);
>                info->data_size = 8;
> @@ -401,6 +409,9 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
>        case STATE_PIO_WRITING:
>                __raw_writesl(info->mmio_base + NDDB, info->data_buff,
>                                DIV_ROUND_UP(info->data_size, 4));
> +               if (info->oob_size > 0)
> +                       __raw_writesl(info->mmio_base + NDDB, info->oob_buff,
> +                                       DIV_ROUND_UP(info->oob_size, 4));
>
>                enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
>
> @@ -413,6 +424,9 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
>        case STATE_PIO_READING:
>                __raw_readsl(info->mmio_base + NDDB, info->data_buff,
>                                DIV_ROUND_UP(info->data_size, 4));
> +               if (info->oob_size > 0)
> +                       __raw_readsl(info->mmio_base + NDDB, info->oob_buff,
> +                                       DIV_ROUND_UP(info->oob_size, 4));
>                break;
>        default:
>                printk(KERN_ERR "%s: invalid state %d\n", __func__,
> @@ -427,7 +441,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
>  static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out)
>  {
>        struct pxa_dma_desc *desc = info->data_desc;
> -       int dma_len = ALIGN(info->data_size, 32);
> +       int dma_len = ALIGN(info->data_size + info->oob_size, 32);
>
>        desc->ddadr = DDADR_STOP;
>        desc->dcmd = DCMD_ENDIRQEN | DCMD_WIDTH4 | DCMD_BURST32 | dma_len;
> @@ -833,7 +847,6 @@ static int pxa3xx_nand_config_flash(struct
> pxa3xx_nand_info *info,
>        info->cmdset = f->cmdset;
>        info->page_size = f->page_size;
>        info->oob_buff = info->data_buff + f->page_size;
> -       info->oob_size = (f->page_size == 2048) ? 64 : 16;
>        info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
>
>        /* calculate addressing information */
> @@ -892,8 +905,6 @@ static int pxa3xx_nand_detect_config(struct
> pxa3xx_nand_info *info)
>        i = __ffs(page_per_block * info->page_size);
>        num_blocks = type->chipsize << (20 - i);
>
> -       info->oob_size = (info->page_size == 2048) ? 64 : 16;
> -
>        /* calculate addressing information */
>        info->col_addr_cycles = (info->page_size == 2048) ? 2 : 1;
>
> --
> 1.7.0.4
>



More information about the linux-mtd mailing list