UBI error on 64bit Machine

[Artem Bityutskiy]

On Fri, 2006-12-15 at 22:16 +0800, Shiner Chen wrote:
> thank you for your quick reply,
> the ubi was loaded as a kernel module and the load command is
> modprobe ubi mtd=0
> (mtd0 device is nandsim module simulate)
> 
> I also found the problem is very strange. I debug the part code and
> found it create volume table twice. the problem occured only on 64bit
> machine!

Probably there is some bug related to 64bit machine. I have no 64bit
setup to test this, but I will try to dig this later anyway

-- 
Best regards,
Artem Bityutskiy (Битюцкий Артём)