reboot problem with jffs2

[David Woodhouse]

On Mon, 2006-12-11 at 10:52 -0800, Jianlin Zeng wrote:
> Thanks for your information! It appears that I need to
> set all flash sectors to read mode before reboot,
> otherwise the CPU won't be able to read any boot code
> from the flash after reboot. Don't know the reason
> behind it but once I did that the reboot works fine.

I told you the reason behind it. Your hardware is broken -- make sure
the reset line to the flash gets hooked up so it's waggled when the CPU
restarts.

-- 
dwmw2