JFFS2 error while Copying

[Niraj Maheshwari]

Hi Artem,

Any concrete cause for this problem for which i should look in to the code ?

I have verified the Flash Driver as it works fine for Intel W18 NOR
flash and i have not modified anything for the Intel Strata W18 flash.
Ideally it should work as it
is as both the flashes are CFI compliant.

Thanks
Niraj

On 5/16/05, Artem B. Bityuckiy <dedekind at yandex.ru> wrote:
> Niraj Maheshwari wrote:
> > Node totlen on flash (0x00800080) != totlen from node ref (0x0000000c).
> I asked about your message in IRC:
> 
> dedekind dwmw2, "Node totlen on flash (0x00800080) != totlen from node
> ref (0x0000000c)" - have you ever seen something like this ?
> jwb that looks like a status register
> jwb 0x00800080 i mean
> dedekind hmm
> dedekind i.e. he configured partition incorrectly ?
> dedekind and reads some mapped registers?
> jwb not necessarily
> jwb it could be that the MTD and JFFS2 layers were out of sync
> jwb or it could just be random data that just _looks_ like the value of
> a status register
> dwmw2 soudns like a flash driver bug
> dwmw2 I've seen that kind of thing before, yes
> dwmw2 flash in status mode when we think we're reading from it
> 
> --
> Best Regards,
> Artem B. Bityuckiy,
> St.-Petersburg, Russia.
>