MTD support for Intel E28F016S3 ?

[Kremer, Alex]

| -----Original Message-----
| From: Larry Doolittle [mailto:ldoolitt at recycle.lbl.gov]
| Sent: Mon, October 22, 2001 6:45 PM
| To: linux-mtd at lists.infradead.org
| Subject: MTD support for Intel E28F016S3 ?
| 
| One weird effect showed up using the 28F320B3B on a nanoEngine, where
| the CFI detect code "found" the chip, although it is truly not CFI
| compliant.  This is apparently a chip bug, and the workaround is to
| use the JEDEC probe first, followed by the CFI detect code.  This
| order is backwards from the official Intel policy on detection logic.
| 

This is strange, I have TE28F320B3B mapped over dc21285 and the cfi_probe
first,
jedec_probe after works fine...

Kreso