Problem on recognise the CFI flash chip on SC520CDP

[data]

Hi David,

We got through the kernel compilation process but we encountered another
problem on recognising the CFI flash chip. I have compared with the boot
up process of other people. They usually have the CFI recongising but we
don't have, i.e. CFI: Found 4*8 device....

We use the on-board flash AMD29LV014B  x 4 Bank#0 & Bank#1

Could you please give us a hand to find out why?

Thanks and regards,

Jimmy

Boot Log:

physmap flash device: 4000000 at 8000000
CFI: Found no Physically mapped flash device at location zero
SC520 CDP flash device: 800000 at 8800000
CFI: Found no SC520CDP Flash Bank #0 device at location zero
request_module[jedec]: Root fs not mounted
mtd: Giving out device 0 to SC520CDP Flash Bank#0
SC520 CDP flash device: 800000 at 9000000
CFI: Found no SC520CDP Flash Bank #1 device at location zero
request_module[jedec]: Root fs not mounted
mtd: Giving out device 1 to SC520CDP Flash Bank#1
SC520 CDP flash device: 80000 at 9800000
CFI: Found no SC520CDP DIL Flash device at location zero
request_module[jedec]: Root fs not mounted
mtd: Giving out device 2 to SC520CDP DIL Flash


Compare with the others:

SC520CDP Flash Bank #0: Found 4 x8 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table v1.0 at 0x0040
SC520CDP Flash Bank #0: JEDEC Device ID is 0xC8. Assuming broken CFI
table.
number of CFI chips: 1
mtd: Giving out device 0 to SC520CDP Flash Bank #0
SC520 CDP flash device: 800000 at 8c00000
SC520CDP Flash Bank #1: Found 4 x8 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table v1.0 at 0x0040
SC520CDP Flash Bank #1: JEDEC Device ID is 0xC8. Assuming broken CFI
table.
number of CFI chips: 1
mtd: Giving out device 1 to SC520CDP Flash Bank #1
SC520 CDP flash device: 80000 at 8400000
SC520CDP DIL Flash: Found no CFI device at location zero