JEDEC and MX29F1610 flash question

[Erwin Authried]

The MX29F1610 operation is rather different
from the other JEDEC flash memories. After
the programming commanmd sequence up to 
128 bytes are sent to flash in a stream,
with max. 30us between the writes. When all
bytes have been sent, there must be a 100us
delay to initiate programming. I don't think
that this mode is already supported in the code.
The buffer write must propably be done with 
interrupts disabled to ensure <=30us between
writes.

-Erwin


To unsubscribe, send "unsubscribe mtd" to majordomo at infradead.org