[PATCH v6 6/7] PCI: mediatek-gen3: Disable device if further setup fails

[Chen-Yu Tsai]

If further setup fails after the device is powered on and link training
succeeds, we want to place the device back in a quiescence state to
avoid unintended activity and save power. This also helps with power
state tracking and balancing once pwrctrl API is integrated.

Power down the device in the error paths of mtk_pcie_startup_port() and
mtk_pcie_probe().

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani at kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 526db8815401..208866d33c77 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -556,10 +556,14 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie)
 		dev_err(pcie->dev,
 			"PCIe link down, current LTSSM state: %s (%#x)\n",
 			ltssm_state, val);
-		return err;
+		goto err_power_down_device;
 	}
 
 	return 0;
+
+err_power_down_device:
+	mtk_pcie_devices_power_down(pcie);
+	return err;
 }
 
 #define MTK_MSI_FLAGS_REQUIRED (MSI_FLAG_USE_DEF_DOM_OPS	| \
@@ -1219,6 +1223,7 @@ static int mtk_pcie_probe(struct platform_device *pdev)
 	return 0;
 
 err_power_down_pcie:
+	mtk_pcie_devices_power_down(pcie);
 	mtk_pcie_power_down(pcie);
 err_tear_down_irq:
 	mtk_pcie_irq_teardown(pcie);
-- 
2.53.0.983.g0bb29b3bc5-goog