[PATCH v5 13/17] spi: stm32: Simplify clock handling with devm_clk_get_enabled()

[Pei Xiao]

Replace devm_clk_get() followed by clk_prepare_enable() with
devm_clk_get_enabled() for the clock. This removes the need for
explicit clock enable and disable calls, as the managed API automatically
handles clock disabling on device removal or probe failure.

Remove the now-unnecessary clk_disable_unprepare() calls from the probe
error paths and the remove callback. Also simplify error handling by
using dev_err_probe().

Signed-off-by: Pei Xiao <xiaopei01 at kylinos.cn>
---
 drivers/spi/spi-stm32.c | 62 +++++++++++------------------------------
 1 file changed, 17 insertions(+), 45 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 8a7f5a10d4af..be88e62075af 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -2360,25 +2360,20 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	int ret;
 
 	cfg = of_device_get_match_data(&pdev->dev);
-	if (!cfg) {
-		dev_err(&pdev->dev, "Failed to get match data for platform\n");
-		return -ENODEV;
-	}
+	if (!cfg)
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "Failed to get match data for platform\n");
 
 	device_mode = of_property_read_bool(np, "spi-slave");
-	if (!cfg->has_device_mode && device_mode) {
-		dev_err(&pdev->dev, "spi-slave not supported\n");
-		return -EPERM;
-	}
+	if (!cfg->has_device_mode && device_mode)
+		return dev_err_probe(&pdev->dev, -EPERM, "spi-slave not supported\n");
 
 	if (device_mode)
 		ctrl = devm_spi_alloc_target(&pdev->dev, sizeof(struct stm32_spi));
 	else
 		ctrl = devm_spi_alloc_host(&pdev->dev, sizeof(struct stm32_spi));
-	if (!ctrl) {
-		dev_err(&pdev->dev, "spi controller allocation failed\n");
-		return -ENOMEM;
-	}
+	if (!ctrl)
+		return dev_err_probe(&pdev->dev, -ENOMEM, "spi controller allocation failed\n");
 	platform_set_drvdata(pdev, ctrl);
 
 	spi = spi_controller_get_devdata(ctrl);
@@ -2409,32 +2404,18 @@ static int stm32_spi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	spi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(spi->clk)) {
-		ret = PTR_ERR(spi->clk);
-		dev_err(&pdev->dev, "clk get failed: %d\n", ret);
-		return ret;
-	}
+	spi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(spi->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(spi->clk), "clk enabled failed\n");
 
-	ret = clk_prepare_enable(spi->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "clk enable failed: %d\n", ret);
-		return ret;
-	}
 	spi->clk_rate = clk_get_rate(spi->clk);
-	if (!spi->clk_rate) {
-		dev_err(&pdev->dev, "clk rate = 0\n");
-		ret = -EINVAL;
-		goto err_clk_disable;
-	}
+	if (!spi->clk_rate)
+		return dev_err_probe(&pdev->dev, -EINVAL, "clk rate = 0\n");
 
 	rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
 	if (rst) {
-		if (IS_ERR(rst)) {
-			ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
-					    "failed to get reset\n");
-			goto err_clk_disable;
-		}
+		if (IS_ERR(rst))
+			return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get reset\n");
 
 		reset_control_assert(rst);
 		udelay(2);
@@ -2461,11 +2442,8 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	dev_dbg(spi->dev, "one message max size %d\n", spi->t_size_max);
 
 	ret = spi->cfg->config(spi);
-	if (ret) {
-		dev_err(&pdev->dev, "controller configuration failed: %d\n",
-			ret);
-		goto err_clk_disable;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "controller configuration failed: %d\n", ret);
 
 	ctrl->auto_runtime_pm = true;
 	ctrl->bus_num = pdev->id;
@@ -2490,8 +2468,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 			dev_info(&pdev->dev, "tx dma disabled\n");
 			spi->dma_tx = NULL;
 		} else {
-			dev_err_probe(&pdev->dev, ret, "failed to request tx dma channel\n");
-			goto err_clk_disable;
+			return dev_err_probe(&pdev->dev, ret, "failed to request tx dma channel\n");
 		}
 	} else {
 		ctrl->dma_tx = spi->dma_tx;
@@ -2579,8 +2556,6 @@ static int stm32_spi_probe(struct platform_device *pdev)
 err_dma_tx_release:
 	if (spi->dma_tx)
 		dma_release_channel(spi->dma_tx);
-err_clk_disable:
-	clk_disable_unprepare(spi->clk);
 
 	return ret;
 }
@@ -2610,9 +2585,6 @@ static void stm32_spi_remove(struct platform_device *pdev)
 		gen_pool_free(spi->sram_pool, (unsigned long)spi->sram_rx_buf,
 			      spi->sram_rx_buf_size);
 
-	clk_disable_unprepare(spi->clk);
-
-
 	pinctrl_pm_select_sleep_state(&pdev->dev);
 }
 
-- 
2.25.1