[PATCH v4 02/17] spi: bcm63xx-hsspi: Simplify clock handling with devm_clk_get_enabled()

[Pei Xiao]

Replace devm_clk_get() followed by clk_prepare_enable() with
devm_clk_get_enabled() for both the "hsspi" and "pll" clocks. This
reduces boilerplate code and error handling, as the managed API
automatically disables the clocks when the device is removed or if
probe fails.

Remove the now-unnecessary clk_disable_unprepare() calls from the
probe error paths and the remove callback. Accordingly, adjust the
error handling labels to direct returns where possible.

Signed-off-by: Pei Xiao <xiaopei01 at kylinos.cn>
---
 drivers/spi/spi-bcm63xx-hsspi.c | 46 +++++++++------------------------
 1 file changed, 12 insertions(+), 34 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 612f8802e690..266eabd3715b 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -758,8 +758,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);
 
-	clk = devm_clk_get(dev, "hsspi");
-
+	clk = devm_clk_get_enabled(dev, "hsspi");
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
@@ -767,41 +766,26 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	if (IS_ERR(reset))
 		return PTR_ERR(reset);
 
-	ret = clk_prepare_enable(clk);
-	if (ret)
-		return ret;
-
 	ret = reset_control_reset(reset);
-	if (ret) {
-		dev_err(dev, "unable to reset device: %d\n", ret);
-		goto out_disable_clk;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "unable to reset device: %d\n", ret);
 
 	rate = clk_get_rate(clk);
 	if (!rate) {
-		pll_clk = devm_clk_get(dev, "pll");
-
-		if (IS_ERR(pll_clk)) {
-			ret = PTR_ERR(pll_clk);
-			goto out_disable_clk;
-		}
-
-		ret = clk_prepare_enable(pll_clk);
-		if (ret)
-			goto out_disable_clk;
+		pll_clk = devm_clk_get_enabled(dev, "pll");
+		if (IS_ERR(pll_clk))
+			return dev_err_probe(dev, PTR_ERR(pll_clk),
+					     "failed enable pll clk\n");
 
 		rate = clk_get_rate(pll_clk);
-		if (!rate) {
-			ret = -EINVAL;
-			goto out_disable_pll_clk;
-		}
+		if (!rate)
+			return dev_err_probe(dev, -EINVAL,
+					     "failed get pll clk rate\n");
 	}
 
 	host = spi_alloc_host(&pdev->dev, sizeof(*bs));
-	if (!host) {
-		ret = -ENOMEM;
-		goto out_disable_pll_clk;
-	}
+	if (!host)
+		return dev_err_probe(dev, -ENOMEM, "alloc host no mem\n");
 
 	bs = spi_controller_get_devdata(host);
 	bs->pdev = pdev;
@@ -887,10 +871,6 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 out_put_host:
 	spi_controller_put(host);
-out_disable_pll_clk:
-	clk_disable_unprepare(pll_clk);
-out_disable_clk:
-	clk_disable_unprepare(clk);
 	return ret;
 }
 
@@ -902,8 +882,6 @@ static void bcm63xx_hsspi_remove(struct platform_device *pdev)
 
 	/* reset the hardware and block queue progress */
 	__raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
-	clk_disable_unprepare(bs->pll_clk);
-	clk_disable_unprepare(bs->clk);
 	sysfs_remove_group(&pdev->dev.kobj, &bcm63xx_hsspi_group);
 }
 
-- 
2.25.1