[PATCH v3 01/17] spi: axiado: Use helper function devm_clk_get_enabled()
Pei Xiao
xiaopei01 at kylinos.cn
Tue Mar 17 00:41:43 PDT 2026
devm_clk_get() and clk_prepare_enable() can now be replaced by
devm_clk_get_enabled() when driver enables the clocks. Moreover, it is no
longer necessary to unprepare and disable the clocks explicitly.
Simplify code.
Signed-off-by: Pei Xiao <xiaopei01 at kylinos.cn>
---
drivers/spi/spi-axiado.c | 31 ++++++++-----------------------
1 file changed, 8 insertions(+), 23 deletions(-)
diff --git a/drivers/spi/spi-axiado.c b/drivers/spi/spi-axiado.c
index dc55c55ae63c..b2d1011357f4 100644
--- a/drivers/spi/spi-axiado.c
+++ b/drivers/spi/spi-axiado.c
@@ -768,25 +768,15 @@ static int ax_spi_probe(struct platform_device *pdev)
if (IS_ERR(xspi->regs))
return PTR_ERR(xspi->regs);
- xspi->pclk = devm_clk_get(&pdev->dev, "pclk");
+ xspi->pclk = devm_clk_get_enabled(&pdev->dev, "pclk");
if (IS_ERR(xspi->pclk))
return dev_err_probe(&pdev->dev, PTR_ERR(xspi->pclk),
- "pclk clock not found.\n");
+ "Unable to enable APB clock.\n");
- xspi->ref_clk = devm_clk_get(&pdev->dev, "ref");
+ xspi->ref_clk = devm_clk_get_enabled(&pdev->dev, "ref");
if (IS_ERR(xspi->ref_clk))
return dev_err_probe(&pdev->dev, PTR_ERR(xspi->ref_clk),
- "ref clock not found.\n");
-
- ret = clk_prepare_enable(xspi->pclk);
- if (ret)
- return dev_err_probe(&pdev->dev, ret, "Unable to enable APB clock.\n");
-
- ret = clk_prepare_enable(xspi->ref_clk);
- if (ret) {
- dev_err(&pdev->dev, "Unable to enable device clock.\n");
- goto clk_dis_apb;
- }
+ "Unable to enable device clock.\n");
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
@@ -815,7 +805,7 @@ static int ax_spi_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
ret = -ENXIO;
- goto clk_dis_all;
+ goto err_disable_pm_runtime;
}
ret = devm_request_irq(&pdev->dev, irq, ax_spi_irq,
@@ -823,7 +813,7 @@ static int ax_spi_probe(struct platform_device *pdev)
if (ret != 0) {
ret = -ENXIO;
dev_err(&pdev->dev, "request_irq failed\n");
- goto clk_dis_all;
+ goto err_disable_pm_runtime;
}
ctlr->use_gpio_descriptors = true;
@@ -849,17 +839,14 @@ static int ax_spi_probe(struct platform_device *pdev)
ret = spi_register_controller(ctlr);
if (ret) {
dev_err(&pdev->dev, "spi_register_controller failed\n");
- goto clk_dis_all;
+ goto err_disable_pm_runtime;
}
return ret;
-clk_dis_all:
+err_disable_pm_runtime:
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(xspi->ref_clk);
-clk_dis_apb:
- clk_disable_unprepare(xspi->pclk);
return ret;
}
@@ -882,8 +869,6 @@ static void ax_spi_remove(struct platform_device *pdev)
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(xspi->ref_clk);
- clk_disable_unprepare(xspi->pclk);
}
/**
--
2.25.1
More information about the Linux-mediatek
mailing list