[PATCH net-next 0/2] Introduce Airoha AN8801R series Gigabit Ethernet PHY driver

[Louis-Alexis Eyraud]

This series introduces the Airoha AN8801R Gigabit Ethernet PHY initial
support.

The Airoha AN8801R is a low power single-port Ethernet PHY Transceiver
with Single-port serdes interface for 1000Base-X/RGMII.
This chip is compliant with 10Base-T, 100Base-TX and 1000Base-T IEEE
802.3(u,ab) and supports:
  - Energy Efficient Ethernet (802.3az)
  - Full Duplex Control Flow (802.3x)
  - auto-negotiation
  - crossover detect and autocorrection,
  - Wake-on-LAN with Magic Packet
  - Jumbo Frame up to 9 Kilobytes.
This PHY also supports up to three user-configurable LEDs, which are
usually used for LAN Activity, 100M, 1000M indication.

The series provides the devicetree binding and the driver that have been
written by AngeloGioacchino Del Regno, based on downstream
implementation ([1]). The driver allows setting up PHY LEDs, 10/100M,
1000M speeds, and Wake on LAN and PHY interrupts.

The series is based on net-next kernel tree (sha1: ed0abfe93fd1) and
I have tested it on Mediatek Genio 720-EVK board (that integrates an
Airoha AN8801RIN/A Ethernet PHY) with early board hardware enablement
patches.

[1]: https://gitlab.com/mediatek/aiot/bsp/linux/-/blob/mtk-v6.6/drivers/net/phy/an8801.c

Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud at collabora.com>
---
AngeloGioacchino Del Regno (2):
      dt-bindings: net: Add support for Airoha AN8801/R GbE PHY
      net: phy: Introduce Airoha AN8801/R Gigabit Ethernet PHY driver

 .../devicetree/bindings/net/airoha,an8801.yaml     |   81 ++
 drivers/net/phy/Kconfig                            |    5 +
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/air_an8801.c                       | 1059 ++++++++++++++++++++
 4 files changed, 1146 insertions(+)
---
base-commit: ed0abfe93fd135dac223e87a3c945017b1fa8bfc
change-id: 20260303-add-airoha-an8801-support-57d544a4afed

Best regards,
-- 
Louis-Alexis Eyraud <louisalexis.eyraud at collabora.com>