[PATCH v6 17/17] pinctrl: airoha: add support of an7563 SoC
Mikhail Kshevetskiy
mikhail.kshevetskiy at iopsys.eu
Sun Jun 28 07:37:33 PDT 2026
This patch adds support of Airoha an7563 SoC pin controller.
Also it adds corresponding device tree binding schema.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>
---
.../pinctrl/airoha,an7563-pinctrl.yaml | 348 +++++
drivers/pinctrl/airoha/Kconfig | 6 +
drivers/pinctrl/airoha/Makefile | 1 +
drivers/pinctrl/airoha/pinctrl-an7563.c | 1115 +++++++++++++++++
4 files changed, 1470 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/airoha,an7563-pinctrl.yaml
create mode 100644 drivers/pinctrl/airoha/pinctrl-an7563.c
diff --git a/Documentation/devicetree/bindings/pinctrl/airoha,an7563-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/airoha,an7563-pinctrl.yaml
new file mode 100644
index 000000000000..e626d3466128
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/airoha,an7563-pinctrl.yaml
@@ -0,0 +1,348 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/airoha,an7563-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN7563 Pin Controller
+
+maintainers:
+ - Lorenzo Bianconi <lorenzo at kernel.org>
+
+description:
+ The Airoha's AN7563 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: airoha,an7563-pinctrl
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - interrupts
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupt-controller
+ - "#interrupt-cells"
+
+patternProperties:
+ '-pins$':
+ type: object
+
+ patternProperties:
+ '^mux(-|$)':
+ type: object
+
+ description:
+ pinmux configuration nodes.
+
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [pon, sipo, mdio, uart, jtag, pcm, spi, pnand, gpio,
+ pcie_reset, pwm, phy1_led0, phy2_led0, phy3_led0,
+ phy4_led0, phy1_led1, phy2_led1, phy3_led1, phy4_led1]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+
+ required:
+ - function
+ - groups
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: pon
+ then:
+ properties:
+ groups:
+ enum: [pon]
+ - if:
+ properties:
+ function:
+ const: sipo
+ then:
+ properties:
+ groups:
+ enum: [sipo, sipo_rclk]
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ items:
+ enum: [hsuart, hsuart_cts_rts]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag_udi, jtag_dfd]
+ - if:
+ properties:
+ function:
+ const: pcm
+ then:
+ properties:
+ groups:
+ enum: [pcm1, pcm2]
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ items:
+ enum: [spi_quad, spi_cs1]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: pnand
+ then:
+ properties:
+ groups:
+ enum: [pnand]
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [gpio28, gpio29, gpio30, gpio31, gpio32,
+ gpio33, gpio34, gpio35, gpio36, gpio37]
+ - if:
+ properties:
+ function:
+ const: pcie_reset
+ then:
+ properties:
+ groups:
+ enum: [pcie_reset0, pcie_reset1]
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6,
+ gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13,
+ gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
+ gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
+ gpio26, gpio27, gpio28, gpio29, gpio30, gpio31,
+ gpio36, gpio37]
+ - if:
+ properties:
+ function:
+ const: phy1_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio8, gpio9, gpio10, gpio11]
+ - if:
+ properties:
+ function:
+ const: phy2_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio8, gpio9, gpio10, gpio11]
+ - if:
+ properties:
+ function:
+ const: phy3_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio8, gpio9, gpio10, gpio11]
+ - if:
+ properties:
+ function:
+ const: phy4_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio8, gpio9, gpio10, gpio11]
+ - if:
+ properties:
+ function:
+ const: phy1_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio4, gpio5, gpio6, gpio7]
+ - if:
+ properties:
+ function:
+ const: phy2_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio4, gpio5, gpio6, gpio7]
+ - if:
+ properties:
+ function:
+ const: phy3_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio4, gpio5, gpio6, gpio7]
+ - if:
+ properties:
+ function:
+ const: phy4_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio4, gpio5, gpio6, gpio7]
+
+ additionalProperties: false
+
+ '^conf(-|$)':
+ type: object
+
+ description:
+ pinconf configuration nodes.
+
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ An array of strings. Each string contains the name of a pin.
+ items:
+ enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27,
+ pcie_reset0, pcie_reset1, i2c_scl, i2c_sda, spi_clk,
+ spi_cs, spi_mosi, spi_miso, uart_txd, uart_rxd]
+ minItems: 1
+ maxItems: 38
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ drive-open-drain: true
+
+ drive-strength:
+ description:
+ Selects the drive strength for MIO pins, in mA.
+ enum: [2, 4, 6, 8]
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl {
+ compatible = "airoha,an7563-pinctrl";
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ pcie1-rst-pins {
+ conf {
+ pins = "pcie_reset1";
+ drive-open-drain = <1>;
+ };
+ };
+
+ pwm-pins {
+ mux {
+ function = "pwm";
+ groups = "gpio18";
+ };
+ };
+
+ spi-pins {
+ mux {
+ function = "spi";
+ groups = "spi_quad", "spi_cs1";
+ };
+ };
+
+ hsuart-pins {
+ mux {
+ function = "uart";
+ groups = "hsuart", "hsuart_cts_rts";
+ };
+ };
+
+ mdio-pins {
+ mux {
+ function = "mdio";
+ groups = "mdio";
+ };
+
+ conf {
+ pins = "gpio2";
+ output-enable;
+ };
+ };
+ };
diff --git a/drivers/pinctrl/airoha/Kconfig b/drivers/pinctrl/airoha/Kconfig
index 159b4496f64a..480ff2f26911 100644
--- a/drivers/pinctrl/airoha/Kconfig
+++ b/drivers/pinctrl/airoha/Kconfig
@@ -13,6 +13,7 @@ config PINCTRL_AIROHA
select GPIOLIB
select GPIOLIB_IRQCHIP
select REGMAP_MMIO
+ imply PINCTRL_AIROHA_AN7563
imply PINCTRL_AIROHA_AN7581
imply PINCTRL_AIROHA_AN7583
imply PINCTRL_AIROHA_EN7523
@@ -20,6 +21,11 @@ config PINCTRL_AIROHA
Say yes here to support pin controller and gpio driver
on Airoha SoC.
+config PINCTRL_AIROHA_AN7563
+ tristate "AN7563 pinctrl"
+ depends on ARM64 || COMPILE_TEST
+ depends on PINCTRL_AIROHA
+
config PINCTRL_AIROHA_AN7581
tristate "AN7581 pinctrl"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/pinctrl/airoha/Makefile b/drivers/pinctrl/airoha/Makefile
index 8b9202321ba8..30e4bee57a4a 100644
--- a/drivers/pinctrl/airoha/Makefile
+++ b/drivers/pinctrl/airoha/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_PINCTRL_AIROHA) += pinctrl-airoha.o
# SoC drivers
+obj-$(CONFIG_PINCTRL_AIROHA_AN7563) += pinctrl-an7563.o
obj-$(CONFIG_PINCTRL_AIROHA_AN7581) += pinctrl-an7581.o
obj-$(CONFIG_PINCTRL_AIROHA_AN7583) += pinctrl-an7583.o
obj-$(CONFIG_PINCTRL_AIROHA_EN7523) += pinctrl-en7523.o
diff --git a/drivers/pinctrl/airoha/pinctrl-an7563.c b/drivers/pinctrl/airoha/pinctrl-an7563.c
new file mode 100644
index 000000000000..40cbbe90cc46
--- /dev/null
+++ b/drivers/pinctrl/airoha/pinctrl-an7563.c
@@ -0,0 +1,1115 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AN7563 SoC pinctrl data for the Airoha pinctrl driver (pinctrl-airoha.c).
+ *
+ * Sources: AN7563 Programming Guide chapter 2 (CHIP SCU, base 0x1fa20000),
+ * chapter 17 (GPIO controller, base 0x1fbf0200) and AN7563PT datasheet
+ * chapter 4.3 (pin sharing scheme).
+ *
+ * Pin numbering follows the GPIO line numbering of the SoC:
+ * pins 0-27 -> GPIO0-GPIO27 (dedicated GPIO pads)
+ * pins 28/29 -> PCIE_RESET0/PCIE_RESET1 pads (GPIO28/GPIO29)
+ * pins 30/31 -> I2C_SCL/I2C_SDA pads (GPIO30/GPIO31)
+ * pins 32-35 -> SPI_CLK/SPI_CS/SPI_MOSI/SPI_MISO pads (GPIO32-GPIO35)
+ * pins 36/37 -> UART_TXD/UART_RXD pads (GPIO36/GPIO37)
+ *
+ * Definitions marked "shared" are identical to the ones already present in
+ * pinctrl-airoha.c (EN7581/AN7583) and must be dropped when this data is
+ * merged there.
+ */
+
+#include "airoha-common.h"
+
+/*
+ * shared - named RG_SW_TOD_1PPS_MODE on AN7563. Only the LAN LED mode
+ * bits and GSW_TOD_1PPS exist on AN7563 (no 2nd I2C, I2S or PON 1PPS).
+ */
+#define REG_GPIO_2ND_I2C_MODE 0x0214
+#define GPIO_LAN3_LED1_MODE_MASK BIT(10)
+#define GPIO_LAN3_LED0_MODE_MASK BIT(9)
+#define GPIO_LAN2_LED1_MODE_MASK BIT(8)
+#define GPIO_LAN2_LED0_MODE_MASK BIT(7)
+#define GPIO_LAN1_LED1_MODE_MASK BIT(6)
+#define GPIO_LAN1_LED0_MODE_MASK BIT(5)
+#define GPIO_LAN0_LED1_MODE_MASK BIT(4)
+#define GPIO_LAN0_LED0_MODE_MASK BIT(3)
+#define GSW_TOD_1PPS_MODE_MASK BIT(1)
+
+/* shared */
+#define REG_GPIO_SPI_CS1_MODE 0x0218
+#define GPIO_PCM_SPI_CS4_MODE_MASK BIT(21)
+#define GPIO_PCM_SPI_CS3_MODE_MASK BIT(20)
+#define GPIO_PCM_SPI_CS2_MODE_MASK BIT(18)
+#define GPIO_PCM_SPI_CS1_MODE_MASK BIT(17)
+#define GPIO_PCM_SPI_MODE_MASK BIT(16)
+#define GPIO_PCM2_MODE_MASK BIT(13)
+#define GPIO_PCM1_MODE_MASK BIT(12)
+#define GPIO_PCM_INT_MODE_MASK BIT(9)
+#define GPIO_PCM_RESET_MODE_MASK BIT(8)
+#define GPIO_SPI_QUAD_MODE_MASK BIT(4)
+#define GPIO_SPI_CS4_MODE_MASK BIT(3)
+#define GPIO_SPI_CS3_MODE_MASK BIT(2)
+#define GPIO_SPI_CS2_MODE_MASK BIT(1)
+#define GPIO_SPI_CS1_MODE_MASK BIT(0)
+
+#define REG_GPIO_PON_MODE 0x021c
+/*
+ * AN7563 specific: route the standalone pads to their GPIO function.
+ * 0: pad keeps its base function, 1: pad is GPIO<n>.
+ */
+#define UART_RXD_GPIO_MODE_MASK BIT(22) /* GPIO37 */
+#define UART_TXD_GPIO_MODE_MASK BIT(21) /* GPIO36 */
+#define SPI_MISO_GPIO_MODE_MASK BIT(20) /* GPIO35 */
+#define SPI_MOSI_GPIO_MODE_MASK BIT(19) /* GPIO34 */
+#define SPI_CS_GPIO_MODE_MASK BIT(18) /* GPIO33 */
+#define SPI_CLK_GPIO_MODE_MASK BIT(17) /* GPIO32 */
+#define I2C_SDA_GPIO_MODE_MASK BIT(16) /* GPIO31 */
+#define I2C_SCL_GPIO_MODE_MASK BIT(15) /* GPIO30 */
+/* shared */
+#define GPIO_PARALLEL_NAND_MODE_MASK BIT(14)
+#define GPIO_SGMII_MDIO_MODE_MASK BIT(13)
+#define SIPO_RCLK_MODE_MASK BIT(11)
+/*
+ * Note: on AN7563 GPIO_PCIE_RESET{0,1} select the GPIO function of the
+ * PCIE_RESET pads (0: PCIe reset, 1: GPIO28/GPIO29).
+ */
+#define GPIO_PCIE_RESET1_MASK BIT(10) /* GPIO29 */
+#define GPIO_PCIE_RESET0_MASK BIT(9) /* GPIO28 */
+#define GPIO_HSUART_CTS_RTS_MODE_MASK BIT(6)
+#define GPIO_HSUART_MODE_MASK BIT(5)
+#define GPIO_SIPO_MODE_MASK BIT(2)
+#define GPIO_PON_MODE_MASK BIT(0)
+
+/* shared */
+#define REG_NPU_UART_EN 0x0224
+#define JTAG_UDI_EN_MASK BIT(4)
+#define JTAG_DFD_EN_MASK BIT(3)
+
+/* LED MAP - shared */
+#define REG_LAN_LED0_MAPPING 0x027c
+#define REG_LAN_LED1_MAPPING 0x0280
+
+#define LAN3_LED_MAPPING_MASK GENMASK(14, 12)
+#define LAN3_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN3_LED_MAPPING_MASK, (_n))
+
+#define LAN2_LED_MAPPING_MASK GENMASK(10, 8)
+#define LAN2_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN2_LED_MAPPING_MASK, (_n))
+
+#define LAN1_LED_MAPPING_MASK GENMASK(6, 4)
+#define LAN1_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN1_LED_MAPPING_MASK, (_n))
+
+#define LAN0_LED_MAPPING_MASK GENMASK(2, 0)
+#define LAN0_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN0_LED_MAPPING_MASK, (_n))
+
+/*
+ * CONF - shared.
+ * The AN7563 standalone IO conf registers use the same bit layout as
+ * EN7581 (UART1_TXD/RXD are named UART_TXD/RXD on AN7563).
+ */
+#define REG_I2C_SDA_E2 0x001c
+#define SPI_MISO_E2_MASK BIT(14)
+#define SPI_MOSI_E2_MASK BIT(13)
+#define SPI_CLK_E2_MASK BIT(12)
+#define SPI_CS0_E2_MASK BIT(11)
+#define PCIE1_RESET_E2_MASK BIT(9)
+#define PCIE0_RESET_E2_MASK BIT(8)
+#define UART1_RXD_E2_MASK BIT(3)
+#define UART1_TXD_E2_MASK BIT(2)
+#define I2C_SCL_E2_MASK BIT(1)
+#define I2C_SDA_E2_MASK BIT(0)
+
+#define REG_I2C_SDA_E4 0x0020
+#define SPI_MISO_E4_MASK BIT(14)
+#define SPI_MOSI_E4_MASK BIT(13)
+#define SPI_CLK_E4_MASK BIT(12)
+#define SPI_CS0_E4_MASK BIT(11)
+#define PCIE1_RESET_E4_MASK BIT(9)
+#define PCIE0_RESET_E4_MASK BIT(8)
+#define UART1_RXD_E4_MASK BIT(3)
+#define UART1_TXD_E4_MASK BIT(2)
+#define I2C_SCL_E4_MASK BIT(1)
+#define I2C_SDA_E4_MASK BIT(0)
+
+#define REG_GPIO_L_E2 0x0024
+#define REG_GPIO_L_E4 0x0028
+
+#define REG_I2C_SDA_PU 0x0044
+#define SPI_MISO_PU_MASK BIT(14)
+#define SPI_MOSI_PU_MASK BIT(13)
+#define SPI_CLK_PU_MASK BIT(12)
+#define SPI_CS0_PU_MASK BIT(11)
+#define PCIE1_RESET_PU_MASK BIT(9)
+#define PCIE0_RESET_PU_MASK BIT(8)
+#define UART1_RXD_PU_MASK BIT(3)
+#define UART1_TXD_PU_MASK BIT(2)
+#define I2C_SCL_PU_MASK BIT(1)
+#define I2C_SDA_PU_MASK BIT(0)
+
+#define REG_I2C_SDA_PD 0x0048
+#define SPI_MISO_PD_MASK BIT(14)
+#define SPI_MOSI_PD_MASK BIT(13)
+#define SPI_CLK_PD_MASK BIT(12)
+#define SPI_CS0_PD_MASK BIT(11)
+#define PCIE1_RESET_PD_MASK BIT(9)
+#define PCIE0_RESET_PD_MASK BIT(8)
+#define UART1_RXD_PD_MASK BIT(3)
+#define UART1_TXD_PD_MASK BIT(2)
+#define I2C_SCL_PD_MASK BIT(1)
+#define I2C_SDA_PD_MASK BIT(0)
+
+#define REG_GPIO_L_PU 0x004c
+#define REG_GPIO_L_PD 0x0050
+
+#define REG_PCIE_RESET_OD 0x018c
+#define PCIE1_RESET_OD_MASK BIT(1)
+#define PCIE0_RESET_OD_MASK BIT(0)
+
+/*
+ * PWM MODE CONF - shared.
+ * The AN7563 GPIO flash mode registers use the same layout as EN7581:
+ * REG_GPIO_FLASH_MODE_CFG covers GPIO0-15, REG_GPIO_FLASH_MODE_CFG_EXT
+ * covers GPIO16-31 (bits 0-15) and GPIO36+ (bits 16+). The SPI pads
+ * (GPIO32-35) have no flash mode configuration bit.
+ */
+#define REG_GPIO_FLASH_MODE_CFG 0x0034
+#define GPIO15_FLASH_MODE_CFG BIT(15)
+#define GPIO14_FLASH_MODE_CFG BIT(14)
+#define GPIO13_FLASH_MODE_CFG BIT(13)
+#define GPIO12_FLASH_MODE_CFG BIT(12)
+#define GPIO11_FLASH_MODE_CFG BIT(11)
+#define GPIO10_FLASH_MODE_CFG BIT(10)
+#define GPIO9_FLASH_MODE_CFG BIT(9)
+#define GPIO8_FLASH_MODE_CFG BIT(8)
+#define GPIO7_FLASH_MODE_CFG BIT(7)
+#define GPIO6_FLASH_MODE_CFG BIT(6)
+#define GPIO5_FLASH_MODE_CFG BIT(5)
+#define GPIO4_FLASH_MODE_CFG BIT(4)
+#define GPIO3_FLASH_MODE_CFG BIT(3)
+#define GPIO2_FLASH_MODE_CFG BIT(2)
+#define GPIO1_FLASH_MODE_CFG BIT(1)
+#define GPIO0_FLASH_MODE_CFG BIT(0)
+
+#define REG_GPIO_FLASH_MODE_CFG_EXT 0x0068
+#define GPIO37_FLASH_MODE_CFG BIT(17)
+#define GPIO36_FLASH_MODE_CFG BIT(16)
+#define GPIO31_FLASH_MODE_CFG BIT(15)
+#define GPIO30_FLASH_MODE_CFG BIT(14)
+#define GPIO29_FLASH_MODE_CFG BIT(13)
+#define GPIO28_FLASH_MODE_CFG BIT(12)
+#define GPIO27_FLASH_MODE_CFG BIT(11)
+#define GPIO26_FLASH_MODE_CFG BIT(10)
+#define GPIO25_FLASH_MODE_CFG BIT(9)
+#define GPIO24_FLASH_MODE_CFG BIT(8)
+#define GPIO23_FLASH_MODE_CFG BIT(7)
+#define GPIO22_FLASH_MODE_CFG BIT(6)
+#define GPIO21_FLASH_MODE_CFG BIT(5)
+#define GPIO20_FLASH_MODE_CFG BIT(4)
+#define GPIO19_FLASH_MODE_CFG BIT(3)
+#define GPIO18_FLASH_MODE_CFG BIT(2)
+#define GPIO17_FLASH_MODE_CFG BIT(1)
+#define GPIO16_FLASH_MODE_CFG BIT(0)
+
+#define AIROHA_PINCTRL_GPIO(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_GPIO_EXT(gpio, mux_val, smux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ 0 \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (smux_val), \
+ (smux_val) \
+ }, \
+ .regmap_size = 2, \
+ }
+
+/* PWM */
+#define AIROHA_PINCTRL_PWM(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_MUX, \
+ REG_GPIO_FLASH_MODE_CFG, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_PWM_EXT(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_PWM_EXT_SEC(gpio, mux_val, smux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (smux_val), \
+ (smux_val) \
+ }, \
+ .regmap_size = 2, \
+ }
+
+#define AIROHA_PINCTRL_PHY_LED0(gpio, mux_val, map_mask, map_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_2ND_I2C_MODE, \
+ (mux_val), \
+ (mux_val), \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_LAN_LED0_MAPPING, \
+ (map_mask), \
+ (map_val), \
+ }, \
+ .regmap_size = 2, \
+ }
+
+#define AIROHA_PINCTRL_PHY_LED1(gpio, mux_val, map_mask, map_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_2ND_I2C_MODE, \
+ (mux_val), \
+ (mux_val), \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_LAN_LED1_MAPPING, \
+ (map_mask), \
+ (map_val), \
+ }, \
+ .regmap_size = 2, \
+ }
+
+static const struct pinctrl_pin_desc pinctrl_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "pcie_reset0"), /* GPIO28 */
+ PINCTRL_PIN(29, "pcie_reset1"), /* GPIO29 */
+ PINCTRL_PIN(30, "i2c_scl"), /* GPIO30 */
+ PINCTRL_PIN(31, "i2c_sda"), /* GPIO31 */
+ PINCTRL_PIN(32, "spi_clk"), /* GPIO32 */
+ PINCTRL_PIN(33, "spi_cs"), /* GPIO33 */
+ PINCTRL_PIN(34, "spi_mosi"), /* GPIO34 */
+ PINCTRL_PIN(35, "spi_miso"), /* GPIO35 */
+ PINCTRL_PIN(36, "uart_txd"), /* GPIO36 */
+ PINCTRL_PIN(37, "uart_rxd"), /* GPIO37 */
+};
+
+static const int pon_pins[] = { 14, 15, 16, 17, 18, 19 };
+static const int sipo_pins[] = { 20, 21 };
+static const int sipo_rclk_pins[] = { 20, 21, 26 };
+static const int mdio_pins[] = { 30, 31 };
+static const int hsuart_pins[] = { 16, 17 };
+static const int hsuart_cts_rts_pins[] = { 14, 15 };
+static const int i2c_pins[] = { 30, 31 };
+static const int jtag_udi_pins[] = { 7, 8, 9, 10, 11 };
+static const int jtag_dfd_pins[] = { 7, 8, 9, 10, 11 };
+static const int pcm1_pins[] = { 22, 23, 24, 25 };
+static const int pcm2_pins[] = { 1, 2, 3, 4 };
+static const int spi_pins[] = { 32, 33, 34, 35 };
+static const int spi_quad_pins[] = { 2, 3 };
+static const int spi_cs1_pins[] = { 4 };
+static const int pnand_pins[] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 27, 32, 33, 34, 35
+};
+static const int gpio0_pins[] = { 0 };
+static const int gpio1_pins[] = { 1 };
+static const int gpio2_pins[] = { 2 };
+static const int gpio3_pins[] = { 3 };
+static const int gpio4_pins[] = { 4 };
+static const int gpio5_pins[] = { 5 };
+static const int gpio6_pins[] = { 6 };
+static const int gpio7_pins[] = { 7 };
+static const int gpio8_pins[] = { 8 };
+static const int gpio9_pins[] = { 9 };
+static const int gpio10_pins[] = { 10 };
+static const int gpio11_pins[] = { 11 };
+static const int gpio12_pins[] = { 12 };
+static const int gpio13_pins[] = { 13 };
+static const int gpio14_pins[] = { 14 };
+static const int gpio15_pins[] = { 15 };
+static const int gpio16_pins[] = { 16 };
+static const int gpio17_pins[] = { 17 };
+static const int gpio18_pins[] = { 18 };
+static const int gpio19_pins[] = { 19 };
+static const int gpio20_pins[] = { 20 };
+static const int gpio21_pins[] = { 21 };
+static const int gpio22_pins[] = { 22 };
+static const int gpio23_pins[] = { 23 };
+static const int gpio24_pins[] = { 24 };
+static const int gpio25_pins[] = { 25 };
+static const int gpio26_pins[] = { 26 };
+static const int gpio27_pins[] = { 27 };
+static const int gpio28_pins[] = { 28 };
+static const int gpio29_pins[] = { 29 };
+static const int gpio30_pins[] = { 30 };
+static const int gpio31_pins[] = { 31 };
+static const int gpio32_pins[] = { 32 };
+static const int gpio33_pins[] = { 33 };
+static const int gpio34_pins[] = { 34 };
+static const int gpio35_pins[] = { 35 };
+static const int gpio36_pins[] = { 36 };
+static const int gpio37_pins[] = { 37 };
+static const int pcie_reset0_pins[] = { 28 };
+static const int pcie_reset1_pins[] = { 29 };
+
+static const struct pingroup pinctrl_groups[] = {
+ PINCTRL_PIN_GROUP("pon", pon),
+ PINCTRL_PIN_GROUP("sipo", sipo),
+ PINCTRL_PIN_GROUP("sipo_rclk", sipo_rclk),
+ PINCTRL_PIN_GROUP("mdio", mdio),
+ PINCTRL_PIN_GROUP("hsuart", hsuart),
+ PINCTRL_PIN_GROUP("hsuart_cts_rts", hsuart_cts_rts),
+ PINCTRL_PIN_GROUP("i2c", i2c),
+ PINCTRL_PIN_GROUP("jtag_udi", jtag_udi),
+ PINCTRL_PIN_GROUP("jtag_dfd", jtag_dfd),
+ PINCTRL_PIN_GROUP("pcm1", pcm1),
+ PINCTRL_PIN_GROUP("pcm2", pcm2),
+ PINCTRL_PIN_GROUP("spi", spi),
+ PINCTRL_PIN_GROUP("spi_quad", spi_quad),
+ PINCTRL_PIN_GROUP("spi_cs1", spi_cs1),
+ PINCTRL_PIN_GROUP("pnand", pnand),
+ PINCTRL_PIN_GROUP("gpio0", gpio0),
+ PINCTRL_PIN_GROUP("gpio1", gpio1),
+ PINCTRL_PIN_GROUP("gpio2", gpio2),
+ PINCTRL_PIN_GROUP("gpio3", gpio3),
+ PINCTRL_PIN_GROUP("gpio4", gpio4),
+ PINCTRL_PIN_GROUP("gpio5", gpio5),
+ PINCTRL_PIN_GROUP("gpio6", gpio6),
+ PINCTRL_PIN_GROUP("gpio7", gpio7),
+ PINCTRL_PIN_GROUP("gpio8", gpio8),
+ PINCTRL_PIN_GROUP("gpio9", gpio9),
+ PINCTRL_PIN_GROUP("gpio10", gpio10),
+ PINCTRL_PIN_GROUP("gpio11", gpio11),
+ PINCTRL_PIN_GROUP("gpio12", gpio12),
+ PINCTRL_PIN_GROUP("gpio13", gpio13),
+ PINCTRL_PIN_GROUP("gpio14", gpio14),
+ PINCTRL_PIN_GROUP("gpio15", gpio15),
+ PINCTRL_PIN_GROUP("gpio16", gpio16),
+ PINCTRL_PIN_GROUP("gpio17", gpio17),
+ PINCTRL_PIN_GROUP("gpio18", gpio18),
+ PINCTRL_PIN_GROUP("gpio19", gpio19),
+ PINCTRL_PIN_GROUP("gpio20", gpio20),
+ PINCTRL_PIN_GROUP("gpio21", gpio21),
+ PINCTRL_PIN_GROUP("gpio22", gpio22),
+ PINCTRL_PIN_GROUP("gpio23", gpio23),
+ PINCTRL_PIN_GROUP("gpio24", gpio24),
+ PINCTRL_PIN_GROUP("gpio25", gpio25),
+ PINCTRL_PIN_GROUP("gpio26", gpio26),
+ PINCTRL_PIN_GROUP("gpio27", gpio27),
+ PINCTRL_PIN_GROUP("gpio28", gpio28),
+ PINCTRL_PIN_GROUP("gpio29", gpio29),
+ PINCTRL_PIN_GROUP("gpio30", gpio30),
+ PINCTRL_PIN_GROUP("gpio31", gpio31),
+ PINCTRL_PIN_GROUP("gpio32", gpio32),
+ PINCTRL_PIN_GROUP("gpio33", gpio33),
+ PINCTRL_PIN_GROUP("gpio34", gpio34),
+ PINCTRL_PIN_GROUP("gpio35", gpio35),
+ PINCTRL_PIN_GROUP("gpio36", gpio36),
+ PINCTRL_PIN_GROUP("gpio37", gpio37),
+ PINCTRL_PIN_GROUP("pcie_reset0", pcie_reset0),
+ PINCTRL_PIN_GROUP("pcie_reset1", pcie_reset1),
+};
+
+/* shared */
+static const char *const pon_groups[] = { "pon" };
+static const char *const sipo_groups[] = { "sipo", "sipo_rclk" };
+static const char *const mdio_groups[] = { "mdio" };
+static const char *const uart_groups[] = {
+ "hsuart", "hsuart_cts_rts"
+};
+static const char *const jtag_groups[] = { "jtag_udi", "jtag_dfd" };
+static const char *const pcm_groups[] = { "pcm1", "pcm2" };
+static const char *const spi_groups[] = { "spi_quad", "spi_cs1" };
+static const char *const pnand_groups[] = { "pnand" };
+static const char *const gpio_groups[] = {
+ "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio33", "gpio34", "gpio35", "gpio36", "gpio37"
+};
+static const char *const pcie_reset_groups[] = {
+ "pcie_reset0", "pcie_reset1"
+};
+static const char *const pwm_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5",
+ "gpio6", "gpio7", "gpio8", "gpio9", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17",
+ "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", "gpio23",
+ "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio36", "gpio37"
+};
+static const char *const phy1_led0_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char *const phy2_led0_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char *const phy3_led0_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char *const phy4_led0_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char *const phy1_led1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char *const phy2_led1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char *const phy3_led1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char *const phy4_led1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group pon_func_group[] = {
+ {
+ .name = "pon",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PON_MODE_MASK,
+ GPIO_PON_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group sipo_func_group[] = {
+ {
+ .name = "sipo",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK,
+ GPIO_SIPO_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "sipo_rclk",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/*
+ * On AN7563 the SMI master (MDC/MDIO) is shared with the I2C_SCL/I2C_SDA
+ * pads and selected via the SGMII MDIO mode bit. I2C is the default pad
+ * function (no mux bit).
+ */
+static const struct airoha_pinctrl_func_group mdio_func_group[] = {
+ {
+ .name = "mdio",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SGMII_MDIO_MODE_MASK,
+ GPIO_SGMII_MDIO_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group uart_func_group[] = {
+ {
+ .name = "hsuart",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_HSUART_MODE_MASK | GPIO_HSUART_CTS_RTS_MODE_MASK,
+ GPIO_HSUART_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+ {
+ .name = "hsuart_cts_rts",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_HSUART_MODE_MASK | GPIO_HSUART_CTS_RTS_MODE_MASK,
+ GPIO_HSUART_MODE_MASK | GPIO_HSUART_CTS_RTS_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group jtag_func_group[] = {
+ {
+ .name = "jtag_udi",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_NPU_UART_EN,
+ JTAG_UDI_EN_MASK,
+ JTAG_UDI_EN_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "jtag_dfd",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_NPU_UART_EN,
+ JTAG_DFD_EN_MASK,
+ JTAG_DFD_EN_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group pcm_func_group[] = {
+ {
+ .name = "pcm1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM1_MODE_MASK,
+ GPIO_PCM1_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm2",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM2_MODE_MASK,
+ GPIO_PCM2_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group spi_func_group[] = {
+ {
+ .name = "spi_quad",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_SPI_QUAD_MODE_MASK,
+ GPIO_SPI_QUAD_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "spi_cs1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_SPI_CS1_MODE_MASK,
+ GPIO_SPI_CS1_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group pnand_func_group[] = {
+ {
+ .name = "pnand",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PARALLEL_NAND_MODE_MASK,
+ GPIO_PARALLEL_NAND_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group gpio_func_group[] = {
+ AIROHA_PINCTRL_GPIO_EXT("gpio28", GPIO28_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET0_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio29", GPIO29_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET1_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio30", GPIO30_FLASH_MODE_CFG,
+ I2C_SCL_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio31", GPIO31_FLASH_MODE_CFG,
+ I2C_SDA_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO("gpio32", SPI_CLK_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO("gpio33", SPI_CS_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO("gpio34", SPI_MOSI_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO("gpio35", SPI_MISO_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio36", GPIO36_FLASH_MODE_CFG,
+ UART_TXD_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio37", GPIO37_FLASH_MODE_CFG,
+ UART_RXD_GPIO_MODE_MASK),
+};
+
+/*
+ * On AN7563 a set GPIO_PCIE_RESET{0,1} bit routes the pad to its GPIO
+ * function, so the PCIe reset function must clear it.
+ */
+static const struct airoha_pinctrl_func_group pcie_reset_func_group[] = {
+ {
+ .name = "pcie_reset0",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PCIE_RESET0_MASK,
+ 0
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcie_reset1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PCIE_RESET1_MASK,
+ 0
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group pwm_func_group[] = {
+ AIROHA_PINCTRL_PWM("gpio0", GPIO0_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio1", GPIO1_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio2", GPIO2_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio3", GPIO3_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio4", GPIO4_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio5", GPIO5_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio6", GPIO6_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio7", GPIO7_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio8", GPIO8_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio9", GPIO9_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio10", GPIO10_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio11", GPIO11_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio12", GPIO12_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio13", GPIO13_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio14", GPIO14_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio15", GPIO15_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio16", GPIO16_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio17", GPIO17_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio18", GPIO18_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio19", GPIO19_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio20", GPIO20_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio21", GPIO21_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio22", GPIO22_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio23", GPIO23_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio24", GPIO24_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio25", GPIO25_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio26", GPIO26_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio27", GPIO27_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio28", GPIO28_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET0_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio29", GPIO29_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET1_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio30", GPIO30_FLASH_MODE_CFG,
+ I2C_SCL_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio31", GPIO31_FLASH_MODE_CFG,
+ I2C_SDA_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio36", GPIO36_FLASH_MODE_CFG,
+ UART_TXD_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio37", GPIO37_FLASH_MODE_CFG,
+ UART_RXD_GPIO_MODE_MASK),
+};
+
+/*
+ * LED pad mapping (datasheet table 4-9):
+ * GPIO8: LAN0_LED0, GPIO9: LAN1_LED0, GPIO10: LAN2_LED0, GPIO11: LAN3_LED0
+ * GPIO7: LAN0_LED1, GPIO6: LAN1_LED1, GPIO5: LAN2_LED1, GPIO4: LAN3_LED1
+ */
+static const struct airoha_pinctrl_func_group phy1_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio8", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio9", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio10", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio11", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(0)),
+};
+
+static const struct airoha_pinctrl_func_group phy2_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio8", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio9", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio10", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio11", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(1)),
+};
+
+static const struct airoha_pinctrl_func_group phy3_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio8", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio9", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio10", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio11", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(2)),
+};
+
+static const struct airoha_pinctrl_func_group phy4_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio8", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio9", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio10", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio11", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(3)),
+};
+
+static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(0)),
+};
+
+static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(1)),
+};
+
+static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(2)),
+};
+
+static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(3)),
+};
+
+static const struct airoha_pinctrl_func pinctrl_funcs[] = {
+ PINCTRL_FUNC_DESC("pon", pon),
+ PINCTRL_FUNC_DESC("sipo", sipo),
+ PINCTRL_FUNC_DESC("mdio", mdio),
+ PINCTRL_FUNC_DESC("uart", uart),
+ PINCTRL_FUNC_DESC("jtag", jtag),
+ PINCTRL_FUNC_DESC("pcm", pcm),
+ PINCTRL_FUNC_DESC("spi", spi),
+ PINCTRL_FUNC_DESC("pnand", pnand),
+ PINCTRL_FUNC_DESC("gpio", gpio),
+ PINCTRL_FUNC_DESC("pcie_reset", pcie_reset),
+ PINCTRL_FUNC_DESC("pwm", pwm),
+ PINCTRL_FUNC_DESC("phy1_led0", phy1_led0),
+ PINCTRL_FUNC_DESC("phy2_led0", phy2_led0),
+ PINCTRL_FUNC_DESC("phy3_led0", phy3_led0),
+ PINCTRL_FUNC_DESC("phy4_led0", phy4_led0),
+ PINCTRL_FUNC_DESC("phy1_led1", phy1_led1),
+ PINCTRL_FUNC_DESC("phy2_led1", phy2_led1),
+ PINCTRL_FUNC_DESC("phy3_led1", phy3_led1),
+ PINCTRL_FUNC_DESC("phy4_led1", phy4_led1),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_pullup_conf[] = {
+ PINCTRL_CONF_DESC(0, REG_GPIO_L_PU, BIT(0)),
+ PINCTRL_CONF_DESC(1, REG_GPIO_L_PU, BIT(1)),
+ PINCTRL_CONF_DESC(2, REG_GPIO_L_PU, BIT(2)),
+ PINCTRL_CONF_DESC(3, REG_GPIO_L_PU, BIT(3)),
+ PINCTRL_CONF_DESC(4, REG_GPIO_L_PU, BIT(4)),
+ PINCTRL_CONF_DESC(5, REG_GPIO_L_PU, BIT(5)),
+ PINCTRL_CONF_DESC(6, REG_GPIO_L_PU, BIT(6)),
+ PINCTRL_CONF_DESC(7, REG_GPIO_L_PU, BIT(7)),
+ PINCTRL_CONF_DESC(8, REG_GPIO_L_PU, BIT(8)),
+ PINCTRL_CONF_DESC(9, REG_GPIO_L_PU, BIT(9)),
+ PINCTRL_CONF_DESC(10, REG_GPIO_L_PU, BIT(10)),
+ PINCTRL_CONF_DESC(11, REG_GPIO_L_PU, BIT(11)),
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_PU, BIT(12)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_PU, BIT(13)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_PU, BIT(14)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_PU, BIT(15)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_PU, BIT(16)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_PU, BIT(17)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_PU, BIT(18)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_PU, BIT(19)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_PU, BIT(20)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_PU, BIT(21)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_PU, BIT(22)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_PU, BIT(23)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_PU, BIT(24)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_PU, BIT(25)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_PU, BIT(26)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_PU, BIT(27)),
+ PINCTRL_CONF_DESC(28, REG_I2C_SDA_PU, PCIE0_RESET_PU_MASK),
+ PINCTRL_CONF_DESC(29, REG_I2C_SDA_PU, PCIE1_RESET_PU_MASK),
+ PINCTRL_CONF_DESC(30, REG_I2C_SDA_PU, I2C_SCL_PU_MASK),
+ PINCTRL_CONF_DESC(31, REG_I2C_SDA_PU, I2C_SDA_PU_MASK),
+ PINCTRL_CONF_DESC(32, REG_I2C_SDA_PU, SPI_CLK_PU_MASK),
+ PINCTRL_CONF_DESC(33, REG_I2C_SDA_PU, SPI_CS0_PU_MASK),
+ PINCTRL_CONF_DESC(34, REG_I2C_SDA_PU, SPI_MOSI_PU_MASK),
+ PINCTRL_CONF_DESC(35, REG_I2C_SDA_PU, SPI_MISO_PU_MASK),
+ PINCTRL_CONF_DESC(36, REG_I2C_SDA_PU, UART1_TXD_PU_MASK),
+ PINCTRL_CONF_DESC(37, REG_I2C_SDA_PU, UART1_RXD_PU_MASK),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_pulldown_conf[] = {
+ PINCTRL_CONF_DESC(0, REG_GPIO_L_PD, BIT(0)),
+ PINCTRL_CONF_DESC(1, REG_GPIO_L_PD, BIT(1)),
+ PINCTRL_CONF_DESC(2, REG_GPIO_L_PD, BIT(2)),
+ PINCTRL_CONF_DESC(3, REG_GPIO_L_PD, BIT(3)),
+ PINCTRL_CONF_DESC(4, REG_GPIO_L_PD, BIT(4)),
+ PINCTRL_CONF_DESC(5, REG_GPIO_L_PD, BIT(5)),
+ PINCTRL_CONF_DESC(6, REG_GPIO_L_PD, BIT(6)),
+ PINCTRL_CONF_DESC(7, REG_GPIO_L_PD, BIT(7)),
+ PINCTRL_CONF_DESC(8, REG_GPIO_L_PD, BIT(8)),
+ PINCTRL_CONF_DESC(9, REG_GPIO_L_PD, BIT(9)),
+ PINCTRL_CONF_DESC(10, REG_GPIO_L_PD, BIT(10)),
+ PINCTRL_CONF_DESC(11, REG_GPIO_L_PD, BIT(11)),
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_PD, BIT(12)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_PD, BIT(13)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_PD, BIT(14)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_PD, BIT(15)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_PD, BIT(16)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_PD, BIT(17)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_PD, BIT(18)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_PD, BIT(19)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_PD, BIT(20)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_PD, BIT(21)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_PD, BIT(22)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_PD, BIT(23)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_PD, BIT(24)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_PD, BIT(25)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_PD, BIT(26)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_PD, BIT(27)),
+ PINCTRL_CONF_DESC(28, REG_I2C_SDA_PD, PCIE0_RESET_PD_MASK),
+ PINCTRL_CONF_DESC(29, REG_I2C_SDA_PD, PCIE1_RESET_PD_MASK),
+ PINCTRL_CONF_DESC(30, REG_I2C_SDA_PD, I2C_SCL_PD_MASK),
+ PINCTRL_CONF_DESC(31, REG_I2C_SDA_PD, I2C_SDA_PD_MASK),
+ PINCTRL_CONF_DESC(32, REG_I2C_SDA_PD, SPI_CLK_PD_MASK),
+ PINCTRL_CONF_DESC(33, REG_I2C_SDA_PD, SPI_CS0_PD_MASK),
+ PINCTRL_CONF_DESC(34, REG_I2C_SDA_PD, SPI_MOSI_PD_MASK),
+ PINCTRL_CONF_DESC(35, REG_I2C_SDA_PD, SPI_MISO_PD_MASK),
+ PINCTRL_CONF_DESC(36, REG_I2C_SDA_PD, UART1_TXD_PD_MASK),
+ PINCTRL_CONF_DESC(37, REG_I2C_SDA_PD, UART1_RXD_PD_MASK),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_drive_e2_conf[] = {
+ PINCTRL_CONF_DESC(0, REG_GPIO_L_E2, BIT(0)),
+ PINCTRL_CONF_DESC(1, REG_GPIO_L_E2, BIT(1)),
+ PINCTRL_CONF_DESC(2, REG_GPIO_L_E2, BIT(2)),
+ PINCTRL_CONF_DESC(3, REG_GPIO_L_E2, BIT(3)),
+ PINCTRL_CONF_DESC(4, REG_GPIO_L_E2, BIT(4)),
+ PINCTRL_CONF_DESC(5, REG_GPIO_L_E2, BIT(5)),
+ PINCTRL_CONF_DESC(6, REG_GPIO_L_E2, BIT(6)),
+ PINCTRL_CONF_DESC(7, REG_GPIO_L_E2, BIT(7)),
+ PINCTRL_CONF_DESC(8, REG_GPIO_L_E2, BIT(8)),
+ PINCTRL_CONF_DESC(9, REG_GPIO_L_E2, BIT(9)),
+ PINCTRL_CONF_DESC(10, REG_GPIO_L_E2, BIT(10)),
+ PINCTRL_CONF_DESC(11, REG_GPIO_L_E2, BIT(11)),
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_E2, BIT(12)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_E2, BIT(13)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_E2, BIT(14)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_E2, BIT(15)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_E2, BIT(16)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_E2, BIT(17)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_E2, BIT(18)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_E2, BIT(19)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_E2, BIT(20)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_E2, BIT(21)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_E2, BIT(22)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_E2, BIT(23)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_E2, BIT(24)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_E2, BIT(25)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_E2, BIT(26)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_E2, BIT(27)),
+ PINCTRL_CONF_DESC(28, REG_I2C_SDA_E2, PCIE0_RESET_E2_MASK),
+ PINCTRL_CONF_DESC(29, REG_I2C_SDA_E2, PCIE1_RESET_E2_MASK),
+ PINCTRL_CONF_DESC(30, REG_I2C_SDA_E2, I2C_SCL_E2_MASK),
+ PINCTRL_CONF_DESC(31, REG_I2C_SDA_E2, I2C_SDA_E2_MASK),
+ PINCTRL_CONF_DESC(32, REG_I2C_SDA_E2, SPI_CLK_E2_MASK),
+ PINCTRL_CONF_DESC(33, REG_I2C_SDA_E2, SPI_CS0_E2_MASK),
+ PINCTRL_CONF_DESC(34, REG_I2C_SDA_E2, SPI_MOSI_E2_MASK),
+ PINCTRL_CONF_DESC(35, REG_I2C_SDA_E2, SPI_MISO_E2_MASK),
+ PINCTRL_CONF_DESC(36, REG_I2C_SDA_E2, UART1_TXD_E2_MASK),
+ PINCTRL_CONF_DESC(37, REG_I2C_SDA_E2, UART1_RXD_E2_MASK),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_drive_e4_conf[] = {
+ PINCTRL_CONF_DESC(0, REG_GPIO_L_E4, BIT(0)),
+ PINCTRL_CONF_DESC(1, REG_GPIO_L_E4, BIT(1)),
+ PINCTRL_CONF_DESC(2, REG_GPIO_L_E4, BIT(2)),
+ PINCTRL_CONF_DESC(3, REG_GPIO_L_E4, BIT(3)),
+ PINCTRL_CONF_DESC(4, REG_GPIO_L_E4, BIT(4)),
+ PINCTRL_CONF_DESC(5, REG_GPIO_L_E4, BIT(5)),
+ PINCTRL_CONF_DESC(6, REG_GPIO_L_E4, BIT(6)),
+ PINCTRL_CONF_DESC(7, REG_GPIO_L_E4, BIT(7)),
+ PINCTRL_CONF_DESC(8, REG_GPIO_L_E4, BIT(8)),
+ PINCTRL_CONF_DESC(9, REG_GPIO_L_E4, BIT(9)),
+ PINCTRL_CONF_DESC(10, REG_GPIO_L_E4, BIT(10)),
+ PINCTRL_CONF_DESC(11, REG_GPIO_L_E4, BIT(11)),
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_E4, BIT(12)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_E4, BIT(13)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_E4, BIT(14)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_E4, BIT(15)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_E4, BIT(16)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_E4, BIT(17)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_E4, BIT(18)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_E4, BIT(19)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_E4, BIT(20)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_E4, BIT(21)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_E4, BIT(22)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_E4, BIT(23)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_E4, BIT(24)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_E4, BIT(25)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_E4, BIT(26)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_E4, BIT(27)),
+ PINCTRL_CONF_DESC(28, REG_I2C_SDA_E4, PCIE0_RESET_E4_MASK),
+ PINCTRL_CONF_DESC(29, REG_I2C_SDA_E4, PCIE1_RESET_E4_MASK),
+ PINCTRL_CONF_DESC(30, REG_I2C_SDA_E4, I2C_SCL_E4_MASK),
+ PINCTRL_CONF_DESC(31, REG_I2C_SDA_E4, I2C_SDA_E4_MASK),
+ PINCTRL_CONF_DESC(32, REG_I2C_SDA_E4, SPI_CLK_E4_MASK),
+ PINCTRL_CONF_DESC(33, REG_I2C_SDA_E4, SPI_CS0_E4_MASK),
+ PINCTRL_CONF_DESC(34, REG_I2C_SDA_E4, SPI_MOSI_E4_MASK),
+ PINCTRL_CONF_DESC(35, REG_I2C_SDA_E4, SPI_MISO_E4_MASK),
+ PINCTRL_CONF_DESC(36, REG_I2C_SDA_E4, UART1_TXD_E4_MASK),
+ PINCTRL_CONF_DESC(37, REG_I2C_SDA_E4, UART1_RXD_E4_MASK),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_pcie_rst_od_conf[] = {
+ PINCTRL_CONF_DESC(28, REG_PCIE_RESET_OD, PCIE0_RESET_OD_MASK),
+ PINCTRL_CONF_DESC(29, REG_PCIE_RESET_OD, PCIE1_RESET_OD_MASK),
+};
+
+static const struct airoha_pinctrl_match_data pinctrl_match_data = {
+ .chip_scu_compatible = "airoha,en7581-chip-scu",
+ .pinctrl_name = KBUILD_MODNAME,
+ .pinctrl_owner = THIS_MODULE,
+ .pins = pinctrl_pins,
+ .num_pins = ARRAY_SIZE(pinctrl_pins),
+ .grps = pinctrl_groups,
+ .num_grps = ARRAY_SIZE(pinctrl_groups),
+ .funcs = pinctrl_funcs,
+ .num_funcs = ARRAY_SIZE(pinctrl_funcs),
+ .confs_info = {
+ [AIROHA_PINCTRL_CONFS_PULLUP] = {
+ .confs = pinctrl_pullup_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pullup_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_PULLDOWN] = {
+ .confs = pinctrl_pulldown_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pulldown_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_DRIVE_E2] = {
+ .confs = pinctrl_drive_e2_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_drive_e2_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_DRIVE_E4] = {
+ .confs = pinctrl_drive_e4_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_drive_e4_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_PCIE_RST_OD] = {
+ .confs = pinctrl_pcie_rst_od_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pcie_rst_od_conf),
+ },
+ },
+};
+
+static const struct of_device_id airoha_pinctrl_of_match[] = {
+ { .compatible = "airoha,an7563-pinctrl", .data = &pinctrl_match_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, airoha_pinctrl_of_match);
+
+static struct platform_driver airoha_pinctrl_driver = {
+ .probe = airoha_pinctrl_probe,
+ .driver = {
+ .name = "pinctrl-airoha-an7563",
+ .of_match_table = airoha_pinctrl_of_match,
+ },
+};
+module_platform_driver(airoha_pinctrl_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo at kernel.org>");
+MODULE_AUTHOR("Benjamin Larsson <benjamin.larsson at genexis.eu>");
+MODULE_AUTHOR("Markus Gothe <markus.gothe at genexis.eu>");
+MODULE_DESCRIPTION("Pinctrl driver for Airoha AN7563 SoC");
--
2.53.0
More information about the Linux-mediatek
mailing list