[PATCH v5 13/21] wifi: mt76: mt792x: add MT7927 WFSYS reset support

[Sean Wang]

From: Sean Wang <sean.wang at mediatek.com>

Add a dedicated MT7927 WFSYS reset path in mt792x_wfsys_reset().

Unlike the existing connac2/connac3 reset flow that toggles the WFSYS
software reset bit and waits for init-done, MT7927 reset is driven
through CBInfra and requires polling ROMCODE_INDEX until the MCU returns
to the idle value after reset.

Keep this dormant for now: no MT7927 PCI IDs are added by this patch, so
it only prepares the reset logic without making the driver bind to MT7927
hardware yet.

Signed-off-by: Sean Wang <sean.wang at mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt792x_dma.c   | 57 ++++++++++++++++++-
 .../net/wireless/mediatek/mt76/mt792x_regs.h  | 11 ++++
 2 files changed, 67 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_dma.c b/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
index 002aece857b2..2835bf273154 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
@@ -370,7 +370,54 @@ int mt792x_poll_rx(struct napi_struct *napi, int budget)
 }
 EXPORT_SYMBOL_GPL(mt792x_poll_rx);
 
-int mt792x_wfsys_reset(struct mt792x_dev *dev)
+static void mt7927_sema_status_read(struct mt792x_dev *dev, u32 addr)
+{
+	u32 remap;
+
+	remap = mt76_rr(dev, MT7927_PCIE2AP_REMAP_WF_0_54);
+	mt76_wr(dev, MT7927_PCIE2AP_REMAP_WF_0_54,
+		(remap & ~MT7927_PCIE2AP_REMAP_WF_0_54_MASK) |
+		MT7927_PCIE2AP_REMAP_WF_0_54_VAL);
+	usleep_range(10, 20);
+
+	mt76_rr(dev, addr);
+
+	mt76_wr(dev, MT7927_PCIE2AP_REMAP_WF_0_54, remap);
+	usleep_range(10, 20);
+}
+
+static int mt7927_wfsys_reset(struct mt792x_dev *dev)
+{
+	struct mt76_dev *mdev = &dev->mt76;
+	u32 val;
+
+	mt7927_sema_status_read(dev, MT7927_SEMA_OWN_STA);
+
+	mt76_set(dev, MT7927_CBINFRA_RGU_WF_RST,
+		 MT7927_CBINFRA_RGU_WF_RST_WF_SUBSYS);
+	usleep_range(1000, 2000);
+
+	mt76_clear(dev, MT7927_CBINFRA_RGU_WF_RST,
+		   MT7927_CBINFRA_RGU_WF_RST_WF_SUBSYS);
+	usleep_range(5000, 10000);
+
+	mt76_wr(dev, MT7927_CBINFRA_MCU_OWN_SET, BIT(0));
+
+	if (!__mt76_poll_msec(mdev, MT7927_ROMCODE_INDEX, 0xffff,
+			      MT7927_MCU_IDLE_VALUE, 200)) {
+		val = mt76_rr(dev, MT7927_ROMCODE_INDEX);
+		dev_err(mdev->dev,
+			"MT7927 WFSYS reset timeout (ROMCODE_INDEX=0x%04x)\n",
+			val & 0xffff);
+		return -ETIMEDOUT;
+	}
+
+	mt7927_sema_status_read(dev, MT7927_SEMA_OWN_STA_REP);
+
+	return 0;
+}
+
+static int mt792x_wfsys_reset_default(struct mt792x_dev *dev)
 {
 	u32 addr = is_connac2(&dev->mt76) ? 0x18000140 : 0x7c000140;
 
@@ -384,5 +431,13 @@ int mt792x_wfsys_reset(struct mt792x_dev *dev)
 
 	return 0;
 }
+
+int mt792x_wfsys_reset(struct mt792x_dev *dev)
+{
+	if (is_mt7927(&dev->mt76))
+		return mt7927_wfsys_reset(dev);
+
+	return mt792x_wfsys_reset_default(dev);
+}
 EXPORT_SYMBOL_GPL(mt792x_wfsys_reset);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_regs.h b/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
index 20d27ae89aca..17504ef8e80d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
@@ -493,4 +493,15 @@
 #define WFSYS_SW_RST_B			BIT(0)
 #define WFSYS_SW_INIT_DONE		BIT(4)
 
+/* CBInfra registers - MT7927 combo chip */
+#define MT7927_CBINFRA_RGU_WF_RST		0x1f8600
+#define MT7927_CBINFRA_RGU_WF_RST_WF_SUBSYS	BIT(4)
+#define MT7927_CBINFRA_MCU_OWN_SET		0x1f5034
+#define MT7927_ROMCODE_INDEX			0xc1604
+#define MT7927_MCU_IDLE_VALUE			0x1d1e
+#define MT7927_PCIE2AP_REMAP_WF_0_54		0x21008
+#define MT7927_PCIE2AP_REMAP_WF_0_54_MASK	GENMASK(15, 0)
+#define MT7927_PCIE2AP_REMAP_WF_0_54_VAL	0x00001807
+#define MT7927_SEMA_OWN_STA			0x40000
+#define MT7927_SEMA_OWN_STA_REP			0x40400
 #endif /* __MT792X_REGS_H */
-- 
2.43.0