[PATCH] dt-bindings: pinctrl: mt8195: Fix name for mediatek,rsel-resistance-in-si-unit
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Thu Jun 30 05:23:34 PDT 2022
When this property was introduced, it contained underscores, but
the actual code wants dashes.
Change it from mediatek,rsel_resistance_in_si_unit to
mediatek,rsel-resistance-in-si-unit.
Fixes: 91e7edceda96 ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
Note: No devicetree uses this property as of now.
Even if any DT did, it wouldn't work, as the pinctrl code checks
for 'mediatek,rsel-resistance-in-si-unit'.
.../devicetree/bindings/pinctrl/pinctrl-mt8195.yaml | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index 15989743afd2..b0fea44403e7 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -51,7 +51,7 @@ properties:
description: The interrupt outputs to sysirq.
maxItems: 1
- mediatek,rsel_resistance_in_si_unit:
+ mediatek,rsel-resistance-in-si-unit:
type: boolean
description: |
Identifying i2c pins pull up/down type which is RSEL. It can support
@@ -144,7 +144,7 @@ patternProperties:
"MTK_PUPD_SET_R1R0_11" define in mt8195.
For pull down type is RSEL, it can add RSEL define & resistance
value(ohm) to set different resistance by identifying property
- "mediatek,rsel_resistance_in_si_unit".
+ "mediatek,rsel-resistance-in-si-unit".
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
& "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
@@ -163,7 +163,7 @@ patternProperties:
};
An example of using si unit resistance value(ohm):
&pio {
- mediatek,rsel_resistance_in_si_unit;
+ mediatek,rsel-resistance-in-si-unit;
}
pincontroller {
i2c0_pin {
@@ -192,7 +192,7 @@ patternProperties:
"MTK_PUPD_SET_R1R0_11" define in mt8195.
For pull up type is RSEL, it can add RSEL define & resistance
value(ohm) to set different resistance by identifying property
- "mediatek,rsel_resistance_in_si_unit".
+ "mediatek,rsel-resistance-in-si-unit".
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
& "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
@@ -211,7 +211,7 @@ patternProperties:
};
An example of using si unit resistance value(ohm):
&pio {
- mediatek,rsel_resistance_in_si_unit;
+ mediatek,rsel-resistance-in-si-unit;
}
pincontroller {
i2c0-pins {
--
2.35.1
More information about the Linux-mediatek
mailing list