[PATCH AUTOSEL 5.18 16/53] scsi: ufs: Fix a race between the interrupt handler and the reset handler

Sasha Levin sashal at kernel.org
Mon Jun 27 19:18:02 PDT 2022


From: Bart Van Assche <bvanassche at acm.org>

[ Upstream commit 2acd76e7b8596e307fcec8fc6bc5fe5ab174749a ]

Prevent that both the interrupt handler and the reset handler try to
complete a request at the same time. This patch is the result of an
analysis of the following crash:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           OE     5.10.107-android13-4-00051-g1e48e8970cca-ab8664745 #1
pc : ufshcd_release_scsi_cmd+0x30/0x46c
lr : __ufshcd_transfer_req_compl+0x4fc/0x9c0
Call trace:
 ufshcd_release_scsi_cmd+0x30/0x46c
 __ufshcd_transfer_req_compl+0x4fc/0x9c0
 ufshcd_poll+0xf0/0x208
 ufshcd_sl_intr+0xb8/0xf0
 ufshcd_intr+0x168/0x2f4
 __handle_irq_event_percpu+0xa0/0x30c
 handle_irq_event+0x84/0x178
 handle_fasteoi_irq+0x150/0x2e8
 __handle_domain_irq+0x114/0x1e4
 gic_handle_irq.31846+0x58/0x300
 el1_irq+0xe4/0x1c0
 cpuidle_enter_state+0x3ac/0x8c4
 do_idle+0x2fc/0x55c
 cpu_startup_entry+0x84/0x90
 kernel_init+0x0/0x310
 start_kernel+0x0/0x608
 start_kernel+0x4ec/0x608

Link: https://lore.kernel.org/r/20220613214442.212466-4-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu at mediatek.com>
Reviewed-by: Adrian Hunter <adrian.hunter at intel.com>
Signed-off-by: Bart Van Assche <bvanassche at acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen at oracle.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f08586a4470c..02a122738686 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6970,14 +6970,14 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
 }
 
 /**
- * ufshcd_eh_device_reset_handler - device reset handler registered to
- *                                    scsi layer.
+ * ufshcd_eh_device_reset_handler() - Reset a single logical unit.
  * @cmd: SCSI command pointer
  *
  * Returns SUCCESS/FAILED
  */
 static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 {
+	unsigned long flags, pending_reqs = 0, not_cleared = 0;
 	struct Scsi_Host *host;
 	struct ufs_hba *hba;
 	u32 pos;
@@ -6996,14 +6996,24 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 	}
 
 	/* clear the commands that were pending for corresponding LUN */
-	for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) {
-		if (hba->lrb[pos].lun == lun) {
-			err = ufshcd_clear_cmds(hba, 1U << pos);
-			if (err)
-				break;
-			__ufshcd_transfer_req_compl(hba, 1U << pos);
-		}
+	spin_lock_irqsave(&hba->outstanding_lock, flags);
+	for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs)
+		if (hba->lrb[pos].lun == lun)
+			__set_bit(pos, &pending_reqs);
+	hba->outstanding_reqs &= ~pending_reqs;
+	spin_unlock_irqrestore(&hba->outstanding_lock, flags);
+
+	if (ufshcd_clear_cmds(hba, pending_reqs) < 0) {
+		spin_lock_irqsave(&hba->outstanding_lock, flags);
+		not_cleared = pending_reqs &
+			ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
+		hba->outstanding_reqs |= not_cleared;
+		spin_unlock_irqrestore(&hba->outstanding_lock, flags);
+
+		dev_err(hba->dev, "%s: failed to clear requests %#lx\n",
+			__func__, not_cleared);
 	}
+	__ufshcd_transfer_req_compl(hba, pending_reqs & ~not_cleared);
 
 out:
 	hba->req_abort_count = 0;
-- 
2.35.1




More information about the Linux-mediatek mailing list