[PATCH v3 08/14] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
Andy Shevchenko
andy.shevchenko at gmail.com
Thu Jun 23 11:07:17 PDT 2022
On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <peterwu.pub at gmail.com> wrote:
>
> From: ChiYuan Huang <cy_huang at richtek.com>
>
> Add chip level mt6370 tcpci driver.
...
> +config TYPEC_TCPCI_MT6370
> + tristate "Mediatek MT6370 Type-C driver"
> + depends on MFD_MT6370
> + help
> + Mediatek MT6370 is a multi-functional IC that includes
> + USB Type-C. It works with Type-C Port Controller Manager
> + to provide USB PD and USB Type-C functionalities.
What will be the module name?
...
> +#include <linux/bits.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
No user of this header is found in this file.
> +#include <linux/platform_device.h>
> +#include <linux/pm_wakeup.h>
> +#include <linux/pm_wakeirq.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/usb/tcpm.h>
> +#include "tcpci.h"
...
> + if (did == MT6370_TCPC_DID_A) {
> + ret = regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80);
> + if (ret)
> + return ret;
return regmap_write(...);
> + }
> +
> + return 0;
...
> + if (ret && !source)
> + ret = regulator_disable(priv->vbus);
> + else if (!ret && source)
> + ret = regulator_enable(priv->vbus);
> + else
> + ret = 0;
> +
> + return ret;
Can it be
if (ret && ...)
return regulator_disable(...);
if (!ret && ...)
return regulator_enable(...);
return 0;
?
...
> + if (!priv->tcpci_data.regmap) {
> + dev_err(&pdev->dev, "Failed to init regmap\n");
> + return -ENODEV;
> + }
return dev_err_probe(...); ?
...
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to check vendor info (%d)\n", ret);
> + return ret;
> + }
Ditto.
...
> + priv->irq = platform_get_irq(pdev, 0);
> + if (priv->irq < 0) {
> + dev_err(&pdev->dev, "Failed to get TCPC irq (%d)\n", priv->irq);
The message like this is printed in case of error inside
platform_get_irq(), no need to duplicate.
> + return priv->irq;
> + }
...
> + priv->tcpci = tcpci_register_port(&pdev->dev, &priv->tcpci_data);
> + if (IS_ERR(priv->tcpci)) {
> + dev_err(&pdev->dev, "Failed to register tcpci port\n");
> + return PTR_ERR(priv->tcpci);
return dev_err_probe(); ?
> + }
...
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to allocate irq (%d)\n", ret);
> + tcpci_unregister_port(priv->tcpci);
> + return ret;
Ditto.
> + }
--
With Best Regards,
Andy Shevchenko
More information about the Linux-mediatek
mailing list