[PATCH v13 03/14] drm/mediatek: dpi: Add support for quantization range

[Bo-Chen Chen]

For RGB colorimetry, CTA-861 support both limited and full range data
when receiving video with RGB color space.
We use drm_default_rgb_quant_range() to determine the correct setting.

Signed-off-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
Reviewed-by: CK Hu <ck.hu at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 34 ++++++++++++++++++------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index f66a121ba0c9..24f4b5618276 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -244,16 +244,30 @@ static void mtk_dpi_config_fb_size(struct mtk_dpi *dpi, u32 width, u32 height)
 	mtk_dpi_mask(dpi, DPI_SIZE, height << VSIZE, VSIZE_MASK);
 }
 
-static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi,
-					 struct mtk_dpi_yc_limit *limit)
+static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi)
 {
-	mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_bottom << Y_LIMINT_BOT,
+	struct mtk_dpi_yc_limit limit;
+
+	if (drm_default_rgb_quant_range(&dpi->mode) ==
+	    HDMI_QUANTIZATION_RANGE_LIMITED) {
+		limit.y_bottom = 0x10;
+		limit.y_top = 0xfe0;
+		limit.c_bottom = 0x10;
+		limit.c_top = 0xfe0;
+	} else {
+		limit.y_bottom = 0;
+		limit.y_top = 0xfff;
+		limit.c_bottom = 0;
+		limit.c_top = 0xfff;
+	}
+
+	mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit.y_bottom << Y_LIMINT_BOT,
 		     Y_LIMINT_BOT_MASK);
-	mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_top << Y_LIMINT_TOP,
+	mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit.y_top << Y_LIMINT_TOP,
 		     Y_LIMINT_TOP_MASK);
-	mtk_dpi_mask(dpi, DPI_C_LIMIT, limit->c_bottom << C_LIMIT_BOT,
+	mtk_dpi_mask(dpi, DPI_C_LIMIT, limit.c_bottom << C_LIMIT_BOT,
 		     C_LIMIT_BOT_MASK);
-	mtk_dpi_mask(dpi, DPI_C_LIMIT, limit->c_top << C_LIMIT_TOP,
+	mtk_dpi_mask(dpi, DPI_C_LIMIT, limit.c_top << C_LIMIT_TOP,
 		     C_LIMIT_TOP_MASK);
 }
 
@@ -458,7 +472,6 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
 static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 				    struct drm_display_mode *mode)
 {
-	struct mtk_dpi_yc_limit limit;
 	struct mtk_dpi_polarities dpi_pol;
 	struct mtk_dpi_sync_param hsync;
 	struct mtk_dpi_sync_param vsync_lodd = { 0 };
@@ -493,11 +506,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	dev_dbg(dpi->dev, "Got  PLL %lu Hz, pixel clock %lu Hz\n",
 		pll_rate, vm.pixelclock);
 
-	limit.c_bottom = 0x0010;
-	limit.c_top = 0x0FE0;
-	limit.y_bottom = 0x0010;
-	limit.y_top = 0x0FE0;
-
 	dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING;
 	dpi_pol.de_pol = MTK_DPI_POLARITY_RISING;
 	dpi_pol.hsync_pol = vm.flags & DISPLAY_FLAGS_HSYNC_HIGH ?
@@ -545,7 +553,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	else
 		mtk_dpi_config_fb_size(dpi, vm.hactive, vm.vactive);
 
-	mtk_dpi_config_channel_limit(dpi, &limit);
+	mtk_dpi_config_channel_limit(dpi);
 	mtk_dpi_config_bit_num(dpi, dpi->bit_num);
 	mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
 	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
-- 
2.18.0