[PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger

ChiaEn Wu peterwu.pub at gmail.com
Fri Jun 17 03:19:42 PDT 2022


Hi Krzysztof,

Thanks for your helpful comments! I have so some questions want to ask
you below.

Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> 於 2022年6月17日 週五 清晨5:05寫道:
>
> On 13/06/2022 04:11, ChiaEn Wu wrote:
> > From: ChiaEn Wu <chiaen_wu at richtek.com>
> >
> > Add Mediatek MT6370 Charger binding documentation.
> >
> > Signed-off-by: ChiaEn Wu <chiaen_wu at richtek.com>
> > ---
> >  .../power/supply/mediatek,mt6370-charger.yaml | 60 +++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
> > new file mode 100644
> > index 000000000000..b63553ebb15b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
> > @@ -0,0 +1,60 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mediatek MT6370 Battery Charger
> > +
> > +maintainers:
> > +  - ChiaEn Wu <chiaen_wu at richtek.com>
> > +
> > +description: |
> > +  This module is part of the MT6370 MFD device.
> > +  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
> > +
> > +properties:
> > +  compatible:
> > +    const: mediatek,mt6370-charger
> > +
> > +  interrupts:
> > +    description: |
> > +      Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ
> > +      "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D"
> > +      are required.
> > +    items:
> > +      - description: BC1.2 done irq
> > +      - description: usb plug in irq
> > +      - description: mivr irq
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: attach_i
> > +      - const: uvp_d_evt
> > +      - const: mivr
> > +
> > +  io-channels:
> > +    description: |
> > +      Use ADC channel to read vbus, ibus, ibat, etc., info. Ibus ADC channel
> > +      is required.
>
> Add io-channel-names and describe each item - what type of ADC it is
> expected to be.
>

I'm afraid I might not be understanding what you mean.
I will try to add some text in "description" and "io-channel-names", like below
----------------------------------
io-channels:
  description: |
    Use ADC channel to read VBUS, IBUS, IBAT, etc., info. Ibus ADC channel
    is required. It can be seen in
include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
  minItems: 1
  maxItems: 9

io-channel-names:
  items:
    - const: vbusdiv5
    - const: vbusdiv2
    - ...
----------------------------------
Did these modifications meet your expectations?

> > +    minItems: 1
> > +    maxItems: 9
> > +
> > +  usb-otg-vbus-regulator:
> > +    type: object
> > +    description: OTG boost regulator.
> > +    $ref: /schemas/regulator/regulator.yaml#
>
> unevaluatedProperties: false

I will add this in the next patch.

>
> > +
> > +    properties:
> > +      enable-gpio:
>
> "gpios", so:
> enable-gpios

If this otg regulator only uses one GPIO Pin, do I still need to
change to "gpios"?
If so, I will refine it along with the regulator "enable-gpio" in MFD
dt-binding.

>
> > +        maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - interrupts
> > +  - interrupt-names
> > +  - io-channels
> > +
> > +additionalProperties: false
> > +
> > +...
>
>
> Best regards,
> Krzysztof

Best regards,
ChiaEn Wu



More information about the Linux-mediatek mailing list