[PATCH v4 1/6] dt-bindings: net: dsa: convert binding for mediatek switches

[Rob Herring]

On Fri, 10 Jun 2022 19:05:36 +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> Convert txt binding to yaml binding for Mediatek switches.
> 
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
> v4:
> - fix squash of port 5 as cpu-port
> - drop type from interrupt-controller and add depency for this
> - use ethernet-ports in examples
> - drop address-/size-cells
> 
> v3:
> - include standalone patch in mt7530 series
> - drop some descriptions (gpio-cells,reset-gpios,reset-names)
> - drop | from descriptions
> - move patternProperties above allOf
> 
> v2:
> - rename mediatek.yaml => mediatek,mt7530.yaml
> - drop "boolean" in description
> - drop description for interrupt-properties
> - drop #interrupt-cells as requirement
> - example: eth=>ethernet,mdio0=>mdio,comment indention
> - replace 0 by GPIO_ACTIVE_HIGH in first example
> - use port(s)-pattern from dsa.yaml
> - adress/size-cells not added to required because this
>   is defined at mdio-level inc current dts , not switch level
> ---
>  .../bindings/net/dsa/mediatek,mt7530.yaml     | 406 ++++++++++++++++++
>  .../devicetree/bindings/net/dsa/mt7530.txt    | 327 --------------
>  2 files changed, 406 insertions(+), 327 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt
> 

Reviewed-by: Rob Herring <robh at kernel.org>