[PATCH v11 03/12] drm/mediatek: dpi: implement a CK/DE pol toggle in SoC config

[CK Hu]

Hi, Bo-Chen:

On Mon, 2022-06-13 at 14:48 +0800, Bo-Chen Chen wrote:
> From: Guillaume Ranquet <granquet at baylibre.com>
> 
> Dp_intf does not support CK/DE polarity because the polarity
> information
> is not used for eDP and DP while dp_intf is only for eDP and DP.
> Therefore, we add a bit of flexibility to support SoCs without CK/DE
> pol
> support.

Reviewed-by: CK Hu <ck.hu at mediatek.com>

> 
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> [Bo-Chen: Add modification reason in commit message.]
> Signed-off-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> Reviewed-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 22 +++++++++++++++++-----
>  1 file changed, 17 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index ce8c5eefe5f1..15218c1e8c11 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -125,6 +125,7 @@ struct mtk_dpi_conf {
>  	bool edge_sel_en;
>  	const u32 *output_fmts;
>  	u32 num_output_fmts;
> +	bool is_ck_de_pol;
>  	const struct mtk_dpi_yc_limit *limit;
>  };
>  
> @@ -211,13 +212,20 @@ static void mtk_dpi_config_pol(struct mtk_dpi
> *dpi,
>  			       struct mtk_dpi_polarities *dpi_pol)
>  {
>  	unsigned int pol;
> +	unsigned int mask;
>  
> -	pol = (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ? 0 : CK_POL)
> |
> -	      (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ? 0 : DE_POL)
> |
> -	      (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> HSYNC_POL) |
> +	mask = HSYNC_POL | VSYNC_POL;
> +	pol = (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> HSYNC_POL) |
>  	      (dpi_pol->vsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> VSYNC_POL);
> -	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol,
> -		     CK_POL | DE_POL | HSYNC_POL | VSYNC_POL);
> +	if (dpi->conf->is_ck_de_pol) {
> +		mask |= CK_POL | DE_POL;
> +		pol |= (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ?
> +			0 : CK_POL) |
> +		       (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ?
> +			0 : DE_POL);
> +	}
> +
> +	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol, mask);
>  }
>  
>  static void mtk_dpi_config_3d(struct mtk_dpi *dpi, bool en_3d)
> @@ -799,6 +807,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
>  	.max_clock_khz = 300000,
>  	.output_fmts = mt8173_output_fmts,
>  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> +	.is_ck_de_pol = true,
>  	.limit = &mtk_dpi_limit,
>  };
>  
> @@ -809,6 +818,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
>  	.max_clock_khz = 150000,
>  	.output_fmts = mt8173_output_fmts,
>  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> +	.is_ck_de_pol = true,
>  	.limit = &mtk_dpi_limit,
>  };
>  
> @@ -818,6 +828,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
>  	.max_clock_khz = 100000,
>  	.output_fmts = mt8183_output_fmts,
>  	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> +	.is_ck_de_pol = true,
>  	.limit = &mtk_dpi_limit,
>  };
>  
> @@ -827,6 +838,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
>  	.max_clock_khz = 150000,
>  	.output_fmts = mt8183_output_fmts,
>  	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> +	.is_ck_de_pol = true,
>  	.limit = &mtk_dpi_limit,
>  };
>